修改串口

本分支在2014/11/11已经部署至金川现场
之后部署一次 合并提交一次

WCS.BLL/HardWare/SmartShelf.cs

@@ -994,7 +994,7 @@ namespace WCS.BLL.HardWare
                             ExceptionMessages.Add($"模组{item.ModuleCode}未响应自检！");
                         }
                         //通信校验
-                        var messages = notReturnList.Select(t => $"模组{t.ModuleCode}未响应自检！").ToList();
+                        var messages = notReturnList.Select(t => $"模组{t.ModuleCode}({t.CurrentMode})未响应自检！").ToList();
                         var exceptionMessage = string.Join("\r\n", messages);
                         var warningModel = new WebSocketMessageModel()
                         {
@@ -2240,7 +2240,9 @@ namespace WCS.BLL.HardWare
 
         public void ResetReturnProcess(byte[] data, int boardId, int lightNumber)
         {
-            var module = this.Modules.Where(t => t.BoardId == boardId && t.CurrentMode == Mode.入库模式).FirstOrDefault();
+            var module = this.Modules
+                             .Where(t => t.BoardId == boardId)
+                             .FirstOrDefault();
             if (module == null)
             {
                 return;

WCS.BLL/Manager/WarningManager.cs

@@ -5,6 +5,7 @@ using System.Data.OscarClient;
 using System.Linq;
 using System.Text;
 using System.Threading.Tasks;
+using WCS.BLL.Config;
 using WCS.BLL.DbModels;
 using WCS.BLL.HardWare;
 using WCS.DAL.Db;
@@ -81,6 +82,21 @@ namespace WCS.BLL.Manager
                                 break;
                         }
                     }
+                    else if (solveType == SolveTypeEnum.屏蔽库位)
+                    {
+                        switch (warningInManager.WarningType)
+                        {
+                            case WarningTypeEnum.出库自检未扫描上架:
+                                DisableNoScan(warningInManager);
+                                break;
+                            case WarningTypeEnum.入库自检未扫描上架:
+                                DisableNoScan(warningInManager);
+                                break;
+                            case WarningTypeEnum.自检未扫描上架:
+                                DisableNoScan(warningInManager);
+                                break;
+                        }
+                    }
                     else if (solveType == SolveTypeEnum.忽略)
                     {
                         //不发指令了
@@ -143,9 +159,85 @@ namespace WCS.BLL.Manager
 
 
         #region 报警消除的处理
-        public static void SolveNoScan(WebSocketMessageModel warning)
+        /// <summary>
+        /// 未扫描上架禁用库位
+        /// </summary>
+        /// <param name="warning"></param>
+        public static void DisableNoScan(WebSocketMessageModel warning)
         {
+            #region 【后台】未扫描上架库位的处理
+            try
+            {
+                //获取库位  
+                var storeInfo = DbHelp.db.Queryable<StoreInfo>()
+                                         .Where(t => t.ShelfId == warning.ShelfId)
+                                         .Where(t => t.Id == warning.StoreId)
+                                         .First();
+                if (storeInfo != null)
+                {
+                    storeInfo.CurrentMatSn = "禁用";
+                    DbHelp.db.Updateable(storeInfo).ExecuteCommand();
+                    if (LocalFile.Config.IsMx)
+                    {
+                        var DingDing = string.Empty;
+                        MXBackgroundThread.SendDingDingMsg($"【智能货架】库位{storeInfo.StoreCode}被 {warning.SolvedUser} “未扫描上架弹窗”屏蔽，请及时调查或维保硬件！", new List<string> { "104379", "103595" }, ref DingDing);
+                        Logs.Write($"【智能货架】库位{storeInfo.StoreCode}被 {warning.SolvedUser} “未扫描上架弹窗”屏蔽，请及时调查或维保硬件！");
+                        #region 计算库位禁用率并发送
+                        Task.Run(() =>
+                        {
+                            var disabledStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .Where(t => t.CurrentMatSn == "禁用")
+                                                     .ToList();
+                            var allStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .ToList();
 
+                            var disabledCount = disabledStore.Count();
+                            var allCount = allStore.Count();
+
+                            var disabledACount = disabledStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allACount = allStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCCount = disabledStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCCount = allStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+
+                            var disabledModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                          .Where(t => t.IsEnable == false)
+                                                          .ToList();
+                            var allModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                     .ToList();
+
+                            var disabledModuleCount = disabledModule.Count();
+                            var allModuleCount = allModule.Count();
+
+                            var disabledAModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allAModuleCount = allModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCModuleCount = allModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+                            var message = $"【智能货架】当前库位总数{allCount},禁用总数{disabledCount}，禁用率{((double)disabledCount / allCount).ToString("P")}，" +
+                            $"其中A区库位总数{allACount},禁用数{disabledACount}，禁用率{((double)disabledACount / allACount).ToString("P")}，" +
+                            $"C区库位总数{allCCount}，禁用数{disabledCCount}，禁用率{((double)disabledCCount / allCCount).ToString("P")}。\r\n" +
+                            $"当前模组总数{allModuleCount},禁用总数{disabledModuleCount}，禁用率{((double)disabledModuleCount / allModuleCount).ToString("P")}，" +
+                            $"其中A区模组总数{allAModuleCount}，禁用数{disabledAModuleCount}，禁用率{((double)disabledAModuleCount / allAModuleCount).ToString("P")}，" +
+                            $"C区模组总数{allCModuleCount}，禁用数{disabledCModuleCount}，禁用率{((double)disabledCModuleCount / allCModuleCount).ToString("P")}。";
+
+                            Logs.Write(message);
+                            var dd = string.Empty;
+                            MXBackgroundThread.SendDingDingMsg(message, new List<string> { "104379", "103595" }, ref dd);
+                        });
+                        #endregion
+                    }
+
+                }
+            }
+            catch (Exception e)
+            {
+                DbHelp.db.RollbackTran();
+            }
+
+            #endregion
         }
 
         public static void SolveLoss(WebSocketMessageModel warning)
@@ -244,6 +336,7 @@ namespace WCS.BLL.Manager
             #endregion
         }
 
+
         public static void GoInRightMode(WebSocketMessageModel warning)
         {
             try

WCS.BLL/Services/IService/IStoreInfoService.cs

@@ -73,5 +73,6 @@ namespace WCS.BLL.Services.IService
         /// <returns></returns>
         public Task<ResponseCommon> disableOrEnableStore(DisableOrEnableStoreRequest request);
 
+        public Task<ResponseCommon> getDisablePercent();
     }
 }

WCS.BLL/Services/Service/SingleLightService.cs

@@ -42,11 +42,12 @@ namespace WCS.BLL.Services.Service
                         Message = "操作失败：没有需要控制的库位",
                     };
                 }
-                //对应库位
+                //库位编码去重
                 var storeCodes = request.StoreList.Select(t => t.StoreCode)
                                                   .Distinct()
                                                   .ToList();
-                var stores = DbHelp.db.Queryable<StoreInfo>().Where(t => storeCodes.Contains(t.StoreCode))
+                var stores = DbHelp.db.Queryable<StoreInfo>()
+                                      .Where(t => storeCodes.Contains(t.StoreCode))
                                       .ToList();
                 if (stores == null || stores.Count == 0)
                 {
@@ -61,6 +62,7 @@ namespace WCS.BLL.Services.Service
                 var shelfIds = stores.Select(t => t.ShelfId).Distinct().ToList();
                 var shelfs = DbHelp.db.Queryable<ShelfInfo>().Where(t => shelfIds.Contains(t.Id))
                                                              .ToList();
+
                 //对应模组信息
                 var moduleIds = stores.Select(t => t.ModuleId).Distinct().ToList();
                 var modules = DbHelp.db.Queryable<ModuleInfo>().Where(t => moduleIds.Contains(t.Id))

WCS.BLL/Services/Service/StoreInfoService.cs

@@ -350,7 +350,55 @@ namespace WCS.BLL.Services.Service
                     if (LocalFile.Config.IsMx)
                     {
                         var DingDing = string.Empty;
-                        MXBackgroundThread.SendDingDingMsg($"【智能货架】模组{moduleInfo.ModuleCode}被屏蔽", new List<string> { "104379", "103595" }, ref DingDing);
+                        MXBackgroundThread.SendDingDingMsg($"【智能货架】模组{moduleInfo.ModuleCode}被屏蔽（模组管理），请及时调查或维保硬件！", new List<string> { "104379", "103595" }, ref DingDing);
+                        Logs.Write($"【智能货架】模组{moduleInfo.ModuleCode}被屏蔽（模组管理），请及时调查或维保硬件！");
+
+                        #region 计算库位禁用率并发送
+                        Task.Run(() =>
+                        {
+                            var disabledStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .Where(t => t.CurrentMatSn == "禁用")
+                                                     .ToList();
+                            var allStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .ToList();
+
+                            var disabledCount = disabledStore.Count();
+                            var allCount = allStore.Count();
+
+                            var disabledACount = disabledStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allACount = allStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCCount = disabledStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCCount = allStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+
+                            var disabledModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                          .Where(t => t.IsEnable == false)
+                                                          .ToList();
+                            var allModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                     .ToList();
+
+                            var disabledModuleCount = disabledModule.Count();
+                            var allModuleCount = allModule.Count();
+
+                            var disabledAModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allAModuleCount = allModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCModuleCount = allModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+                            var message = $"【智能货架】当前库位总数{allCount},禁用总数{disabledCount}，禁用率{((double)disabledCount / allCount).ToString("P")}，" +
+                            $"其中A区库位总数{allACount},禁用数{disabledACount}，禁用率{((double)disabledACount / allACount).ToString("P")}，" +
+                            $"C区库位总数{allCCount}，禁用数{disabledCCount}，禁用率{((double)disabledCCount / allCCount).ToString("P")}。\r\n" +
+                            $"当前模组总数{allModuleCount},禁用总数{disabledModuleCount}，禁用率{((double)disabledModuleCount / allModuleCount).ToString("P")}，" +
+                            $"其中A区模组总数{allAModuleCount}，禁用数{disabledAModuleCount}，禁用率{((double)disabledAModuleCount / allAModuleCount).ToString("P")}，" +
+                            $"C区模组总数{allCModuleCount}，禁用数{disabledCModuleCount}，禁用率{((double)disabledCModuleCount / allCModuleCount).ToString("P")}。";
+
+                            Logs.Write(message);
+                            var dd = string.Empty;
+                            MXBackgroundThread.SendDingDingMsg(message, new List<string> { "104379", "103595" }, ref dd);
+                        });
+                        #endregion
                     }
                 }
                 else
@@ -552,7 +600,56 @@ namespace WCS.BLL.Services.Service
                     if (LocalFile.Config.IsMx)
                     {
                         var DingDing = string.Empty;
-                        MXBackgroundThread.SendDingDingMsg($"【智能货架】库位{storeInfo.StoreCode}被屏蔽", new List<string> { "104379", "103595" }, ref DingDing);
+                        MXBackgroundThread.SendDingDingMsg($"【智能货架】库位{storeInfo.StoreCode}被屏蔽（库位管理），请及时调查或维保硬件！", new List<string> { "104379", "103595" }, ref DingDing);
+                        Logs.Write($"【智能货架】库位{storeInfo.StoreCode}被屏蔽（库位管理），请及时调查或维保硬件！");
+                        
+                        #region 计算库位禁用率并发送
+                        Task.Run(() =>
+                        {
+                            var disabledStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .Where(t => t.CurrentMatSn == "禁用")
+                                                     .ToList();
+                            var allStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .ToList();
+
+                            var disabledCount = disabledStore.Count();
+                            var allCount = allStore.Count();
+
+                            var disabledACount = disabledStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allACount = allStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCCount = disabledStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCCount = allStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+
+                            var disabledModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                          .Where(t => t.IsEnable == false)
+                                                          .ToList();
+                            var allModule = DbHelp.db.Queryable<ModuleInfo>()
+                                                     .ToList();
+
+                            var disabledModuleCount = disabledModule.Count();
+                            var allModuleCount = allModule.Count();
+
+                            var disabledAModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                            var allAModuleCount = allModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                            var disabledCModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                            var allCModuleCount = allModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+                            var message = $"【智能货架】当前库位总数{allCount},禁用总数{disabledCount}，禁用率{((double)disabledCount / allCount).ToString("P")}，" +
+                            $"其中A区库位总数{allACount},禁用数{disabledACount}，禁用率{((double)disabledACount / allACount).ToString("P")}，" +
+                            $"C区库位总数{allCCount}，禁用数{disabledCCount}，禁用率{((double)disabledCCount / allCCount).ToString("P")}。\r\n" +
+                            $"当前模组总数{allModuleCount},禁用总数{disabledModuleCount}，禁用率{((double)disabledModuleCount / allModuleCount).ToString("P")}，" +
+                            $"其中A区模组总数{allAModuleCount}，禁用数{disabledAModuleCount}，禁用率{((double)disabledAModuleCount / allAModuleCount).ToString("P")}，" +
+                            $"C区模组总数{allCModuleCount}，禁用数{disabledCModuleCount}，禁用率{((double)disabledCModuleCount / allCModuleCount).ToString("P")}。";
+
+                            Logs.Write(message);
+
+                            var dd = string.Empty;
+                            MXBackgroundThread.SendDingDingMsg(message, new List<string> { "104379", "103595" }, ref dd);
+                        });
+                        #endregion
                     }
 
                     //库位
@@ -618,6 +715,74 @@ namespace WCS.BLL.Services.Service
             }
         }
 
+        public async Task<ResponseCommon> getDisablePercent()
+        {
+            try
+            {
+                #region 计算库位禁用率
+                var disabledStore = DbHelp.db.Queryable<StoreInfo>()
+                                                     .Where(t => t.CurrentMatSn == "禁用")
+                                                     .ToList();
+                var allStore = DbHelp.db.Queryable<StoreInfo>()
+                                         .ToList();
+
+                var disabledCount = disabledStore.Count();
+                var allCount = allStore.Count();
+
+                var disabledACount = disabledStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                var allACount = allStore.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                var disabledCCount = disabledStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                var allCCount = allStore.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+
+                var disabledModule = DbHelp.db.Queryable<ModuleInfo>()
+                                              .Where(t => t.IsEnable == false)
+                                              .ToList();
+                var allModule = DbHelp.db.Queryable<ModuleInfo>()
+                                         .ToList();
+
+                var disabledModuleCount = disabledModule.Count();
+                var allModuleCount = allModule.Count();
+
+                var disabledAModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+                var allAModuleCount = allModule.Where(t => t.ShelfCode.Contains("A")).ToList().Count();
+
+                var disabledCModuleCount = disabledModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+                var allCModuleCount = allModule.Where(t => t.ShelfCode.Contains("C")).ToList().Count();
+
+                var message = $"【智能货架】当前库位总数{allCount},禁用总数{disabledCount}，禁用率{((double)disabledCount / allCount).ToString("P")}，" +
+                $"其中A区库位总数{allACount},禁用数{disabledACount}，禁用率{((double)disabledACount / allACount).ToString("P")}，" +
+                $"C区库位总数{allCCount}，禁用数{disabledCCount}，禁用率{((double)disabledCCount / allCCount).ToString("P")}。\r\n" +
+                $"当前模组总数{allModuleCount},禁用总数{disabledModuleCount}，禁用率{((double)disabledModuleCount / allModuleCount).ToString("P")}，" +
+                $"其中A区模组总数{allAModuleCount}，禁用数{disabledAModuleCount}，禁用率{((double)disabledAModuleCount / allAModuleCount).ToString("P")}，" +
+                $"C区模组总数{allCModuleCount}，禁用数{disabledCModuleCount}，禁用率{((double)disabledCModuleCount / allCModuleCount).ToString("P")}。";
+                #endregion
+
+                //非盟讯公司的展示
+                if (LocalFile.Config.IsMx == false)
+                {
+                    message = $"【智能货架】当前库位总数{allCount},禁用总数{disabledCount}，禁用率{((double)disabledCount / allCount).ToString("P")}。";
+                }
+
+                return new ResponseCommon()
+                {
+                    Code = 200,
+                    Message = $"Success",
+                    Data = message ,
+                };
+            }
+            catch (Exception ex)
+            {
+                DbHelp.db.RollbackTran();
+                return new ResponseCommon()
+                {
+                    Code = 300,
+                    Message = $"操作失败：异常{ex.Message}！"
+                };
+            }
+        }
+
         #endregion
     }
 }

WCS.Model/WebSocketModel/SolveWarningRequesr.cs

@@ -14,5 +14,6 @@ namespace WCS.Model.WebSocketModel
     {
         处理 = 0,
         忽略 = 1,
+        屏蔽库位 = 2,
     }
 }

WCS.WebApi/Controllers/StoreInfoController.cs

@@ -89,6 +89,13 @@ namespace WCS.WebApi.Controllers
         {
             return await _storeInfoService.disableOrEnableStore(request);
         }
+
+        [Route("getDisablePercent")]
+        [HttpPost(Name = "getDisablePercent")]
+        public async Task<ResponseBase> getDisablePercent(DisableOrEnableStoreRequest request)
+        {
+            return await _storeInfoService.getDisablePercent();
+        }
         #endregion
     }
 }

货架标准上位机/App.xaml

@@ -21,8 +21,8 @@
             <!--字体-->
             <FontFamily x:Key="IconFont">pack://application,,,/智能仓储WCS管理系统;component/Fonts/#iconfont</FontFamily>
             <!--字符串-->
-            <sys:String x:Key="AboutInfo1">卓越盟讯</sys:String>
+            <!--<sys:String x:Key="AboutInfo1">卓越盟讯</sys:String>-->
-            <!--<sys:String x:Key="AboutInfo1">金川数智</sys:String>-->
+            <sys:String x:Key="AboutInfo1">金川数智</sys:String>
             <sys:String x:Key="AboutInfo2">智造未来</sys:String>
         </ResourceDictionary>
     </Application.Resources>

货架标准上位机/ScannerManager.cs

@@ -4,9 +4,7 @@ using System.Linq;
 using System.Text;
 using System.Threading;
 using System.Threading.Tasks;
-using TouchSocket.Core;
+using System.IO.Ports;
-using TouchSocket.SerialPorts;
-using TouchSocket.Sockets;
 using 智能仓储WCS管理系统.Views.Controls;
 
 namespace 智能仓储WCS管理系统
@@ -24,33 +22,29 @@ namespace 智能仓储WCS管理系统
             {
                 try
                 {
-                    var client = new SerialPortClient();
+                    var _serialPort = new SerialPort();
-                    //成功连接到端口
+
-                    client.Connected = (client, e) =>
+                    // 初始化串口配置
+                    _serialPort = new SerialPort
                     {
-                        Logs.Write($"扫码枪{client.MainSerialPort.PortName},已成功连接！", LogsType.Scanner);
+                        PortName = COM,          
-                        //初始化扫码枪对象
+                        BaudRate = 9600,
+                        Parity = Parity.None,
+                        DataBits = 8,
+                        StopBits = StopBits.One,
+                        Handshake = Handshake.None,
+                        Encoding = Encoding.UTF8   // 根据设备要求选择编码
+                    };
+                    _serialPort.Open();
+
                     var Scanner = new Scanner()
                     {
-                            SerialPortClient = (SerialPortClient)client,
+                        SerialPort = _serialPort,
                         //ScannerDisplayControl = new ScannerDisplayControl(client.MainSerialPort.PortName),
-                            COM = client.MainSerialPort.PortName,
+                        COM = COM,
                         TempCode = string.Empty,
                     };
                     Scanners.Add(Scanner);
-                        return EasyTask.CompletedTask;
-                    };
-                    client.Setup(new TouchSocket.Core.TouchSocketConfig()
-                        .SetSerialPortOption(new SerialPortOption()
-                        {
-                            BaudRate = 9600,//波特率
-                            DataBits = 8,//数据位
-                            Parity = System.IO.Ports.Parity.None,//校验位
-                            PortName = COM,
-                            StopBits = System.IO.Ports.StopBits.One//停止位
-                        }));
-
-                    client.Connect(LocalFile.Config.ScannerTimeOut, new CancellationToken());
                 }
                 catch (Exception ex)
                 {
@@ -63,7 +57,7 @@ namespace 智能仓储WCS管理系统
 
     public class Scanner
     {
-        public SerialPortClient SerialPortClient { get; set; }
+        public SerialPort SerialPort { get; set; }
 
         public ScannerDisplayControl ScannerDisplayControl { get; set; }
 

货架标准上位机/ViewModels/InInventoryViewModel.cs

@@ -30,6 +30,7 @@ using WCS.Model.ApiModel.MatBaseInfo;
 using System.Security.Cryptography;
 using Ping9719.WpfEx;
 using System.Diagnostics.Eventing.Reader;
+using System.IO.Ports;
 
 namespace 智能仓储WCS管理系统.ViewModel
 {
@@ -41,28 +42,42 @@ namespace 智能仓储WCS管理系统.ViewModel
             var scanners = ScannerManager.Scanners;
             foreach (var scanner in scanners)
             {
-                scanner.SerialPortClient.Received = (client, e) =>
+                scanner.SerialPort.DataReceived += SerialPort_DataReceived;
+            }
+            RevertScannerStatus();
+        }
+
+
+        public void SerialPort_DataReceived(object sender, SerialDataReceivedEventArgs e)
         {
+            try
+            {
+                var _serialPort = sender as SerialPort;
+                if (_serialPort == null)
+                    return;
+                //// 读取所有可用数据
+                string receivedData = _serialPort.ReadExisting();
                 //获取串口号
-                    var COM = client.MainSerialPort.PortName;
+                var COM = _serialPort.PortName;
                 //获取扫码枪对象
                 var scanner = ScannerManager.Scanners.Where(t => t.COM == COM).FirstOrDefault();
                 if (scanner == null)
-                        return EasyTask.CompletedTask;
+                    return;
-                    int newBytes = e.ByteBlock.Len;
+                //int newBytes = e.ByteBlock.Len;
-                    if (newBytes > 0)
+                if (receivedData.Length > 0)
                 {
-                        var currentScanedCode = Encoding.UTF8.GetString(e.ByteBlock, 0, e.ByteBlock.Len);
+                    var currentScanedCode = receivedData;
                     Logs.Write($"接收到扫码枪[{scanner.COM}]扫码数据{currentScanedCode}", LogsType.Scanner);
                     scanner.TempCode += currentScanedCode;
                     //校验末尾码
                     CheckDataCompleteness(scanner);
                     scanner.ScannerDisplayControl.RefreshValues(scanner.ShelfCode, scanner.MatSn, scanner.InstoreUser);
                 }
-                    return EasyTask.CompletedTask;
-                };
             }
-            RevertScannerStatus();
+            catch (Exception ex)
+            {
+                Console.WriteLine($"接收数据错误: {ex.Message}");
+            }
         }
 
         #region Property

货架标准上位机/ViewModels/MXViewModel/MXOutOrderDetailViewViewModel.cs

@@ -102,7 +102,9 @@ namespace 智能仓储WCS管理系统.ViewModel
                         }
                         else if (Result != null && Result.Code == 200 && (Result.Data == null || Result.Data.Lists == null || Result.Data.Lists.Count == 0))
                         {
-                            MessageBox.Show($"未查询到领料明细！所推荐物料在此货架上不存在，请确认是否在其他货架上！\r\n{string.Join(",\r\n", matSns)}");
+                            var content = $"MES/WMS系统按先进先出推荐物料条码在此货架上不存在，请确认物料是否在其他货架（B区）上！或者确认是否是物料上架后丢失（复制物料条码后在[出入记录]功能中通过物料SN查询确认是否丢失，如果确认是此货架上丢失，重新上架再次进行出库操作），具体条码如下：\r\n{string.Join(",\r\n", matSns)}";
+                            //MessageBox.Show($"未查询到领料明细！所推荐物料在此货架上不存在，请确认是否在其他货架上！或者是否已经丢失？（复制物料条码后在[出入记录]功能中即可查询）\r\n{string.Join(",\r\n", matSns)}");
+                            TipView.Show(content, "提示", true);
                             DataGridItemSource = null;
                         }
                         else
@@ -120,12 +122,12 @@ namespace 智能仓储WCS管理系统.ViewModel
                 }
                 else if (result != null && result.code == 200 && (result.data == null || result.data.Count == 0))
                 {
-                    Growl.Warning("未查询到物料明细！MES推荐物料明细为空！");
+                    Growl.Warning("未查询到物料明细！MES推荐物料明细为空！请确认该单据是否已发或咨询MES系统相关负责人！");
                     DataGridItemSource = null;
                 }
                 else
                 {
-                    Growl.Warning("未查询到领料明细！请求MES接口失败！");
+                    Growl.Warning("未查询到领料明细！请求MES接口失败！请确认该单据是否已发或咨询MES系统相关负责人！");
                     DataGridItemSource = null;
                 }
             });

货架标准上位机/ViewModels/StoreInfoViewModel.cs

@@ -230,6 +230,37 @@ namespace 智能仓储WCS管理系统.ViewModel
             }
             #endregion
         }
+        
+
+        public ICommand BtnDisablePercentCommand { get => new DelegateCommand(DisablePercent); }
+        public void DisablePercent()
+        {
+            #region 调用接口 获取屏蔽率
+            try
+            {
+                var body = new DisableOrEnableStoreRequest()
+                {
+                };
+                var Result = ApiHelp.GetDataFromHttp<ResponseCommon>(LocalFile.Config.ApiIpHost + "storeInfo/getDisablePercent", body, "POST");
+                if (Result != null && Result.Code == 200)
+                {
+                    HandyControl.Controls.MessageBox.Show(Result.Data.ToString());
+                }
+                else if (Result != null)
+                {
+                    Growl.Warning(Result.Message);
+                }
+                else
+                {
+                    Growl.Warning("操作失败：请重试！");
+                }
+            }
+            catch (Exception ex)
+            {
+                Growl.Error("操作失败：" + ex.Message);
+            }
+            #endregion
+        }
         #endregion
 
         #region PageOperation 分页操作

货架标准上位机/Views/StoreInfoView.xaml

@@ -67,6 +67,11 @@
                             Grid.Column="9" MinHeight="40" FontSize="18" Content=" 重置" FontFamily="{StaticResource IconFont}"
                             Command="{Binding BtnResetCommand}">
                     </Button>
+
+                    <Button Style="{StaticResource ButtonWarning}"  hc:BorderElement.CornerRadius="12" 
+                            Grid.Column="8" Grid.Row="1" MinHeight="30" FontSize="18" Content="&#xe652; 屏蔽率" FontFamily="{StaticResource IconFont}"
+                            Command="{Binding BtnDisablePercentCommand}">
+                    </Button>
                 </Grid>
             </Border>
 

货架标准上位机/Views/Windows/TipView.xaml

@@ -32,7 +32,7 @@
                 <TextBlock Margin="5,0" Text="{Binding Title, FallbackValue=标题}" TextWrapping="Wrap" VerticalAlignment="Center" HorizontalAlignment="Left"/>
                 <Button Grid.Column="1" Visibility="{Binding IsClose,Converter={StaticResource Boolean2VisibilityHiddenConverter}}" Style="{StaticResource ButtonIcon}" hc:IconElement.Geometry="{StaticResource CloseGeometry}" Click="closeClick"/>
             </Grid>
-            <TextBlock Margin="5,0" Grid.Row="1" Text="{Binding Content, FallbackValue=我是内容}" FontSize="18" TextWrapping="Wrap" VerticalAlignment="Center" HorizontalAlignment="Center"/>
+            <TextBox Margin="5,0" Grid.Row="1" Text="{Binding Content, Mode=OneWay}" FontSize="18" TextWrapping="Wrap" VerticalAlignment="Center" HorizontalAlignment="Center"/>
             <hc:UniformSpacingPanel x:Name="spacingPanel" Grid.Row="2" Margin="5,0,5,10" Spacing="10" Width="auto" ChildWrapping="Wrap" HorizontalAlignment="Center">
                 <Button Content="确认"/>
                 <Button Content="取消"/>

货架标准上位机/Views/Windows/WarningWindow.xaml.cs

@@ -66,6 +66,19 @@ namespace 智能仓储WCS管理系统
             return Show(content, title, new string[] { "确认", "忽略" }, _warning, isVisCloseBut);
         }
 
+        /// <summary>
+        /// 显示提示框
+        /// </summary>
+        /// <param name="content">内容</param>
+        /// <param name="title">标题</param>
+        /// <param name="isVisCloseBut">界面右上角是否显示关闭按钮</param>
+        /// <returns>点击的按钮文本</returns>
+        public static WarningWindow ShowNoScanError(string content, string title, WebSocketMessageModel _warning, bool isVisCloseBut = true, Window owner = null)
+        {
+            content = content + "\r\n确认对应无物料可点击[屏蔽库位]按钮进行库位屏蔽！";
+            return Show(content, title, new string[] { "确认","屏蔽库位", "忽略" }, _warning, isVisCloseBut);
+        }
+
         /// <summary>
         /// 显示提示框
         /// </summary>
@@ -92,6 +105,14 @@ namespace 智能仓储WCS管理系统
                         Content = item,
                     };
                     button.Margin = new Thickness(10, 0, 10, 0);
+                    button.FontSize = 18;
+                    if (item == "屏蔽库位")
+                    {
+                        button.Foreground = Brushes.Red;
+                        button.FontWeight = FontWeights.DemiBold;
+                        //WaningWindow.Content = WaningWindow.Content + "\r\n确认对应无物料可点击[屏蔽库位]按钮进行库位屏蔽！";
+                    }
+
                     button.Click += (s, e) =>
                     {
                         clikename = ((Button)s).Content.ToString();
@@ -99,10 +120,26 @@ namespace 智能仓储WCS管理系统
                         #region 调用接口处理异常/消除报警
                         try
                         {
+                            var solveType = SolveTypeEnum.忽略;
+                            switch (clikename)
+                            {
+                                case "确认":
+                                    solveType = SolveTypeEnum.处理;
+                                    break;
+                                case "忽略":
+                                    solveType = SolveTypeEnum.忽略;
+                                    break;
+                                case "屏蔽库位":
+                                    solveType = SolveTypeEnum.屏蔽库位;
+                                    break;
+                                default:
+                                    solveType = SolveTypeEnum.忽略;
+                                    break;
+                            }
                             var body = new SolveWarningRequest()
                             {
                                 Guid = _warning.Guid,
-                                SolveType = clikename == "确认" ? SolveTypeEnum.处理 : SolveTypeEnum.忽略,
+                                SolveType = solveType,
                                 UserName = LocalStatic.CurrentUser,
                                 DeviceType = "WCS前端",
                             };

货架标准上位机/WarningManager.cs

@@ -25,8 +25,15 @@ namespace 智能仓储WCS管理系统
             {
                 Logs.Write($"【添加报警信息弹窗】报警类型：{warningModel.WarningType} 报警信息:{warningModel.WarningMessage} Guid:{warningModel.Guid}", LogsType.WebSocket);
                 Application.Current.Dispatcher.Invoke(new Action(() =>
+                {
+                    if (warningModel.WarningType == WarningTypeEnum.入库自检未扫描上架 || warningModel.WarningType == WarningTypeEnum.出库自检未扫描上架 || warningModel.WarningType == WarningTypeEnum.自检未扫描上架)
+                    {
+                        warnings.Add(WarningWindow.ShowNoScanError(warningModel.WarningMessage, "报警信息", warningModel));
+                    }
+                    else
                     {
                         warnings.Add(WarningWindow.Show(warningModel.WarningMessage, "报警信息", warningModel));
+                    }
                 }));
             }
         }

货架标准上位机/货架标准上位机.csproj

@@ -60,8 +60,8 @@
 		<PackageReference Include="SqlSugar" Version="5.1.4.149" />
 		<PackageReference Include="SqlSugar.MySqlConnector" Version="5.1.3.42" />
 		<PackageReference Include="System.Data.SQLite.Core" Version="1.0.118" />
+		<PackageReference Include="System.IO.Ports" Version="9.0.0" />
 		<PackageReference Include="TouchSocket.Http" Version="2.0.3" />
-		<PackageReference Include="TouchSocket.SerialPorts" Version="2.0.2" />
 	</ItemGroup>
 
 	<ItemGroup>
@@ -84,12 +84,12 @@
 		<Resource Include="Resources\Logo.ico" />
 		<Resource Include="Resources\Logo.png" />
 		<Resource Include="Resources\主页.png" />
-		<Resource Include="Resources\入库.png"/>
+		<Resource Include="Resources\入库.png" />
-		<Resource Include="Resources\出库.png"/>
+		<Resource Include="Resources\出库.png" />
-		<Resource Include="Resources\盘点.png"/>
+		<Resource Include="Resources\盘点.png" />
-		<Resource Include="Resources\查询.png"/>
+		<Resource Include="Resources\查询.png" />
-		<Resource Include="Resources\货架.png"/>
+		<Resource Include="Resources\货架.png" />
-		<Resource Include="Resources\物料.png"/>
+		<Resource Include="Resources\物料.png" />
 		<Resource Include="Resources\权限.png" />
 		<Resource Include="Resources\调试.png" />
 	</ItemGroup>