MAX_CARLINK_A270S/MXC_A27-PCB4.5-270T/app/moto/protocol/gpio_protocol.c

#include "awtk.h"
#include "gpio_protocol.h"
#include "board.h"
#include "chip.h"


void right_led_on(void){
    gpio_direction_output(GPIO_LIGHT_R_LED, TRUE);
}

void right_led_off(void){
    gpio_direction_output(GPIO_LIGHT_R_LED, FALSE);
}

void left_led_on(void){
    gpio_direction_output(GPIO_LIGHT_L_LED, TRUE);
}

void left_led_off(void){
    gpio_direction_output(GPIO_LIGHT_L_LED, FALSE);
}

void yg_led_on(void){
    gpio_direction_output(GPIO_LIGHT_YG_LED, TRUE);
}

void yg_led_off(void){
    gpio_direction_output(GPIO_LIGHT_YG_LED, FALSE);
}

void abs_led_on(void){
    gpio_direction_output(GPIO_LIGHT_ABS, TRUE);
}

void abs_led_off(void){
    gpio_direction_output(GPIO_LIGHT_ABS, FALSE);
}

void oil_led_on(void){
    gpio_direction_output(GPIO_LIGHT_OIL, TRUE);
}

void oil_led_off(void){
    gpio_direction_output(GPIO_LIGHT_OIL, FALSE);
}

void n_led_on(void){
    gpio_direction_output(GPIO_LIGHT_N_LED, TRUE);
}

void n_led_off(void){
    gpio_direction_output(GPIO_LIGHT_N_LED, FALSE);
}

void eng_led_on(void){
    gpio_direction_output(GPIO_LIGHT_ENG_LED, TRUE);
}

void eng_led_off(void){
    gpio_direction_output(GPIO_LIGHT_ENG_LED, FALSE);
}

void vbat_led_on(void){
    gpio_direction_output(GPIO_LIGHT_VBAT_LED, TRUE);
}

void vbat_led_off(void){
    gpio_direction_output(GPIO_LIGHT_VBAT_LED, FALSE);
}



void right_led_switch(uint8_t type){
    switch(type){
        case 0:right_led_off();break;
        case 1:right_led_on();break;
        default:break;
    }
}

void left_led_switch(uint8_t type){
    switch(type){
        case 0:left_led_off();break;
        case 1:left_led_on();break;
        default:break;
    }
}

void yg_led_switch(uint8_t type){
    switch(type){
        case 0:yg_led_off();break;
        case 1:
            yg_led_on();
            break;
        default:break;
    }
}

void abs_led_switch(uint8_t type){
    switch(type){
        case 0:abs_led_off();break;
        case 1:abs_led_on();break;
        default:break;
    }
}

void oil_led_switch(uint8_t type){
    switch(type){
        case 0:oil_led_off();break;
        case 1:oil_led_on();break;
        default:break;
    }
}

void n_led_switch(uint8_t type){
    switch(type){
        case 0:n_led_off();break;
        case 1:n_led_on();break;
        default:break;
    }
}

void vbat_led_switch(uint8_t type){
    switch(type){
        case 0:vbat_led_off();break;
        case 1:vbat_led_on();break;
        default:break;
    }
}

void eng_led_switch(uint8_t type){
    switch(type){
        case 0:eng_led_off();break;
        case 1:eng_led_on();break;
        default:break;
    }
}


void light_gpio_init(void){
        //灯光使能
	gpio_direction_output(47, TRUE);
	//R_LED
	gpio_direction_output(GPIO_LIGHT_R_LED, TRUE);
	//YG_LED
	gpio_direction_output(GPIO_LIGHT_YG_LED, TRUE);
	//OIL_LED
	gpio_direction_output(GPIO_LIGHT_OIL, TRUE);
	//L_LED
	gpio_direction_output(GPIO_LIGHT_L_LED, TRUE);
	//N_LED
	gpio_direction_output(GPIO_LIGHT_N_LED, TRUE);
    #if DEVICE_MXC_A58
    //ABS_LED
	gpio_direction_output(GPIO_LIGHT_ABS, TRUE);
	//ENG_LED
	gpio_direction_output(GPIO_LIGHT_ENG_LED, TRUE);
    #endif
	//VBAT_LED
	gpio_direction_output(GPIO_LIGHT_VBAT_LED, TRUE);

    gpio_direction_input(GPIO_LIGHT_SET);
    gpio_direction_input(GPIO_LIGHT_MODE);

    gpio_timer();//按键 //左右灯光

}

void light_off(void){
	//R_LED
	gpio_direction_output(GPIO_LIGHT_R_LED, FALSE);
	//YG_LED
	gpio_direction_output(GPIO_LIGHT_YG_LED, FALSE);
	//OIL_LED
	gpio_direction_output(GPIO_LIGHT_OIL, FALSE);
	//L_LED
	gpio_direction_output(GPIO_LIGHT_L_LED, FALSE);
	//N_LED
	gpio_direction_output(GPIO_LIGHT_N_LED, FALSE);
	#if DEVICE_MXC_A58
    //ABS_LED
	gpio_direction_output(GPIO_LIGHT_ABS, FALSE);
    //ENG_LED
	gpio_direction_output(GPIO_LIGHT_ENG_LED, FALSE);
    #endif
	//VBAT_LED
	gpio_direction_output(GPIO_LIGHT_VBAT_LED, FALSE);

}


uint8_t gpio_state = 0;
extern uint8_t complex_call;
extern void Set_sys_call_state(uint8_t value);
extern void Set_sys_call_key_state(uint8_t value);
extern void Set_sys_call_number(char *value);
extern void Set_sys_call_renumber(char *value);

static void gpio_bt2_handler(void *param)
{

	if(gpio_get_value(BT2_CALL_INT)){
		gpio_state = 0;
		printf("gpio 47 >1  cat1\n");
		//if(Get_sys_call_state() == 2)
		Set_sys_call_state(0);
		complex_call = 0;
		Set_sys_call_key_state(0);
		Set_sys_call_number(0);
		Set_sys_call_renumber(0);
		
		// gpio_direction_output(BT2_CALL_UART_SW, 0);//<2F><><EFBFBD><EFBFBD>ֻ<EFBFBD><D6BB><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD> Ӧ<><D3A6>Ϊ1 <20><><EFBFBD><EFBFBD>cat1
	}else{
		printf("gpio 47 >0  bt2\n");
	 	// gpio_direction_output(BT2_CALL_UART_SW, 0);
	}

	return;
}

void BT2_reset(void)
{
	gpio_direction_input(BT2_CALL_INT);
	gpio_direction_output(BT2_CALL_UART_SW, 0);
	gpio_irq_request(BT2_CALL_INT,GPIOIRQ_TYPE_EDGE_BOTH, gpio_bt2_handler, NULL);
}

void BT2_state_error_reset(void){
	gpio_direction_output(BT2_CALL_RET, 1);
	mdelay(100);
	gpio_direction_output(BT2_CALL_RET, 0);
}

void cat1_enable(void){
	printf("cat1 close .\r\n");
	// printf("cat1 open .\r\n");
	// gpio_direction_output(CAT_PWTKEY_GPIO, 1);
}

void CAT1_reset(void)
{
	// gpio_direction_output(CAT1_UART_SW_GPIO, 1);
	gpio_direction_output(CAT1_RESET_GPIO, 0);

	gpio_direction_output(CAT_PWTKEY_GPIO, 0);
	// gpio_direction_output(CAT1_UART_SW_GPIO, 0);
}