调整一些配置项

MXC_A27-PCB4.5-CANUI/ArkmicroFiles/libboard-amt630hv100/include/board.h

@@ -263,9 +263,9 @@
 
 #ifdef WIFI_SUPPORT
 #define CARLINK_EY         0
-#define CARLINK_EC         0
-#define CARLINK_CP         1
-#define CARLINK_AA         1
+#define CARLINK_EC         1
+#define CARLINK_CP         0
+#define CARLINK_AA         0
 
 #if !DEVICE_MXC_A27
 #define WIFI_RESET_IO      12

MXC_A27-PCB4.5-CANUI/ArkmicroFiles/libcpu-amt630hv100/source/can.c

@@ -757,61 +757,6 @@ static void can_rxdemo_thread(void *param)
 				for (j = 0; j < rxmsg[i].DLC; j++){
 					tlv_data_value[j] = rxmsg[i].Data[j];
 				}				
-				// printf("can>> Id = %03x",rxmsg[i].StdId);
-				#if DEVICE_MXC_A58
-				switch(rxmsg[i].StdId){
-					case 0x37B:
-						if(can_flag != 10)
-							can_flag = 10;
-						tcsworking_event_handing(tlv_data_value);//TCS
-						break;
-					case 0x12B:
-						if(can_flag != 10)
-							can_flag = 10;
-						tcsswitch_event_handing(tlv_data_value);//tcs开关
-						break;
-					case 0x401:
-						break;
-					case 0x402://ECU故障码
-						break;
-					case 0xA5://ABS故障码
-						if(can_flag != 10)
-							can_flag = 10;
-						abs_dtc_event_handing(tlv_data_value);
-						break;
-					case 0xA3://ABS数据
-						break;
-					case 0x101://发送机数据
-						if(can101_flag != 10)
-							can101_flag = 10;
-						if(can_flag != 10)
-							can_flag = 10;
-						speed_event_handing(tlv_data_value);
-						break;
-					
-					default:
-						break;
-				}
-				#elif DEVICE_MXC_A59
-
-				switch(rxmsg[i].StdId){
-					case 0x402://ECU故障码
-						if(can_flag != 10)
-							can_flag = 10;
-						A59_dtc_event_handing(tlv_data_value);
-						break;
-					// case 0x101://发送机数据
-					// 	if(can101_flag != 10)
-					// 		can101_flag = 10;
-					// 	if(can_flag != 10)
-					// 		can_flag = 10;
-					// 	speed_event_handing(tlv_data_value);
-					// 	break;
-					default:
-						break;
-				}
-				#else
-				
 				switch(rxmsg[i].StdId){
 					// #ifdef UI_VIEW_QUICKLY_ARRANGE
 					// case 0x100:
@@ -840,7 +785,7 @@ static void can_rxdemo_thread(void *param)
 						speed_event_handing(tlv_data_value);
 						break;
 					case 0x400:
-						kp_control_event_handing(tlv_data_value);//引擎开关
+						kp_control_event_handing(tlv_data_value);//快排信号指示灯
 						break;
 					case 0x401:
 						if(mile_flag != 10)
@@ -852,7 +797,6 @@ static void can_rxdemo_thread(void *param)
 						break;
 					default:break;
 				}
-				#endif
 			}
 		}
 	}

MXC_A27-PCB4.5-CANUI/lib/awtk/awtk-examples/MOTO_A270S/src/common/moto_config.h

@@ -19,7 +19,7 @@
 
 #define MOTO_ICMX_GB518_A272S       6
 
-#define MOTO_WARE_HOSE  MOTO_ICMX_GB518_A270S
+#define MOTO_WARE_HOSE  MOTO_ICMX_GB518_A270S_KP
 
 #if (MOTO_WARE_HOSE == MOTO_ICMX_GB518_A270M)
 #define SOFT_WARE_HOST      1

MXC_A27-PCB4.5-CANUI/lib/lwip/src/api/sockets.c

@@ -505,7 +505,7 @@ alloc_socket(struct netconn *newconn, int accepted)
   LWIP_UNUSED_ARG(accepted);
 
   /* allocate a new socket identifier */
-  for (i = 0; i < NUM_SOCKETS; ++i) {
+  for (i = 3; i < NUM_SOCKETS; ++i) {
     /* Protect socket array */
     SYS_ARCH_PROTECT(lev);
     if (!sockets[i].conn) {

MXC_A27-PCB4.5-CANUI/proj/settings/amt630hv100.dnx

@@ -19,7 +19,7 @@
         <LeaveTargetRunning>_ 0</LeaveTargetRunning>
     </JLinkDriver>
     <DebugChecksum>
-        <Checksum>1356576539</Checksum>
+        <Checksum>3953223197</Checksum>
     </DebugChecksum>
     <Exceptions>
         <StopOnUncaught>_ 0</StopOnUncaught>