1.将A27新UI文件夹重命名为CANUI 2.A272O新版本发布

MXC_A27-PCB4.5-CANUI/ArkmicroFiles/libcpu-amt630hv100/include/dma.h

@@ -0,0 +1,95 @@
+#ifndef _DMA_H
+#define _DMA_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define DMA_INT_TC		(1 << 0)
+#define DMA_INT_ERR		(1 << 1)
+
+enum DMA_HW_HS_MAP{
+	SPI0_RX = 0,
+	SPI0_TX,
+	SPI1_RX,
+	SPI1_TX,
+	I2C0_RX,
+	I2C0_TX,
+	I2C1_RX,
+	I2C1_TX,
+	UART0_RX,
+	UART0_TX,
+	UART1_RX,
+	UART1_TX,
+	UART2_RX,
+	UART2_TX,
+	UART3_RX,
+	UART3_TX,
+	I2S_RX,
+	I2S_TX,
+	I2S1_RX,
+	I2S1_TX,
+	SDMMC0_RTX,
+};
+
+enum dma_transfer_direction {
+	DMA_MEM_TO_MEM,
+	DMA_MEM_TO_DEV,
+	DMA_DEV_TO_MEM,
+	DMA_DEV_TO_DEV,
+	DMA_TRANS_NONE,
+};
+
+enum dma_buswidth {
+	DMA_BUSWIDTH_1_BYTE = 0,
+	DMA_BUSWIDTH_2_BYTES = 1,
+	DMA_BUSWIDTH_4_BYTES = 2,
+};
+
+struct dma_config {
+	enum dma_transfer_direction direction;
+	int src_id;
+	int dst_id;
+	unsigned int src_addr;
+	unsigned int dst_addr;
+	enum dma_buswidth src_addr_width;
+	enum dma_buswidth dst_addr_width;
+	u32 src_maxburst;
+	u32 dst_maxburst;
+	u32 transfer_size;
+	int blkint_en;
+};
+
+struct dma_lli {
+	unsigned int src_addr;
+	unsigned int dst_addr;
+	unsigned int next_lli;
+	unsigned int control;
+};
+
+struct dma_chan {
+	int chan_id;
+	int in_use;
+	void (*irq_callback)(void *param, unsigned int mask);
+	void *callback_param;
+	struct dma_lli *lli;
+};
+
+struct dma_chan *dma_request_channel(int favorite_ch);
+void dma_release_channel(struct dma_chan *chan);
+int dma_config_channel(struct dma_chan *chan, struct dma_config *config);
+int dma_register_complete_callback(struct dma_chan *chan,
+											void (*callback)(void *param, unsigned int mask),
+											void *callback_param);
+int dma_start_channel(struct dma_chan *chan);
+int dma_stop_channel(struct dma_chan *chan);
+int dma_init(void);
+int dma_m2mcpy(unsigned int dst_addr, unsigned int src_addr, int size);
+
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif