#ifndef _BOARD_H
#define _BOARD_H


/********** display configuration **********/
#define LCD_INTERFACE_TTL		0
#define LCD_INTERFACE_LVDS		1
#define LCD_INTERFACE_CPU		2
#define LCD_INTERFACE_MIPI		3

#define LCD_WIRING_MODE_RGB		0
#define LCD_WIRING_MODE_RBG		1
#define LCD_WIRING_MODE_GRB		2
#define LCD_WIRING_MODE_GBR		3
#define LCD_WIRING_MODE_BRG		4
#define LCD_WIRING_MODE_BGR		5

#define LCD_WIRING_BIT_ORDER_MSB	0
#define LCD_WIRING_BIT_ORDER_LSB	1

#define LVDS_PANEL_FORMAT_TI	0
#define LVDS_PANEL_FORMAT_NS	1

#define LVDS_PANEL_DATA_8BIT	0
#define LVDS_PANEL_DATA_6BIT	1

#define CPU_PANEL_18BIT_MODE     0
#define CPU_PANEL_16BIT_MODE     1
#define CPU_PANEL_9BIT_MODE      2
#define CPU_PANEL_8BIT_MODE      3

#define LCD_ROTATE_ANGLE_0		0
#define LCD_ROTATE_ANGLE_90		1
#define LCD_ROTATE_ANGLE_180	2
#define LCD_ROTATE_ANGLE_270	3

#define LCD_H_FLIP				0	//水平镜像
#define LCD_V_FLIP				0	//垂直镜像
//#define LCD_CLK_INVERSE			//LCD时钟极性反向
#define LCD_ROTATE_ANGLE		LCD_ROTATE_ANGLE_0

#if defined(LVGL_VG_GPU) || defined(VG_ONLY) || defined(REVERSE_TRACK)
#ifndef VG_DRIVER
#error "Error! Must define VG_DRIVER."
#endif
#endif

#if defined(DOUBLE_POINTER_HALO) || defined(SINGLE_POINTER_HALO)
#ifndef VG_ONLY
#error "Error! Must define VG_ONLY."
#endif
#endif

#ifdef VG_ONLY
#if defined(DOUBLE_POINTER_HALO)
#define LCD_WIDTH	1280
#define LCD_HEIGHT	480
#define LCD_BPP		16
#define LCD_INTERFACE_TYPE		LCD_INTERFACE_LVDS
#elif defined(SINGLE_POINTER_HALO)
#define LCD_WIDTH	1024
#define LCD_HEIGHT	600
#define LCD_BPP		16
#define LCD_INTERFACE_TYPE		LCD_INTERFACE_TTL
#endif
#elif defined(AWTK)
//240719 lj
// #define LCD_WIDTH	1024
// #define LCD_HEIGHT	600
// #define LCD_BPP		16
#define LCD_WIDTH	800
#define LCD_HEIGHT	480
#define LCD_BPP		32
#define LCD_INTERFACE_TYPE		LCD_INTERFACE_TTL
#else
#define LCD_WIDTH	1024
#define LCD_HEIGHT	600
#ifdef REVERSE_UI
#define LCD_BPP		32
#else
#define LCD_BPP		16
#endif
#define LCD_INTERFACE_TYPE		LCD_INTERFACE_TTL
#endif

#if LCD_INTERFACE_TYPE == LCD_INTERFACE_TTL
#define LCD_WIRING_MODE			LCD_WIRING_MODE_RGB
#define LCD_WIRING_BIT_ORDER	LCD_WIRING_BIT_ORDER_LSB
#elif LCD_INTERFACE_TYPE == LCD_INTERFACE_LVDS
#define LCD_WIRING_MODE			LCD_WIRING_MODE_BGR
#define LCD_WIRING_BIT_ORDER	LCD_WIRING_BIT_ORDER_MSB
#define LVDS_SCREEN_RST_GPIO	74
#define LVDS_PANEL_FORMAT		LVDS_PANEL_FORMAT_TI
#define LVDS_PANEL_DATA			LVDS_PANEL_DATA_8BIT
#elif LCD_INTERFACE_TYPE == LCD_INTERFACE_CPU
#define CPU_PANEL_DATA			CPU_PANEL_8BIT_MODE
#elif LCD_INTERFACE_TYPE == LCD_INTERFACE_MIPI
#define LCD_WIRING_MODE			LCD_WIRING_MODE_RGB
#define LCD_WIRING_BIT_ORDER	LCD_WIRING_BIT_ORDER_MSB
#endif

#define FB_SIZE		(LCD_WIDTH * LCD_HEIGHT * LCD_BPP / 8)

#define VIDEO_DISPLAY_WIDTH			LCD_WIDTH
#define VIDEO_DISPLAY_HEIGHT		LCD_HEIGHT
#define VIDEO_DISPLAY_BUF_NUM		2


#if (LCD_WIDTH == 1024 && LCD_HEIGHT == 600)
#define LCD_TIMING_VBP		1
#define LCD_TIMING_VFP		1
#define LCD_TIMING_VSW		30
#define LCD_TIMING_HBP		100
#define LCD_TIMING_HFP		100
#define LCD_TIMING_HSW		370
#define LCD_CLK_FREQ		50000000
#elif (LCD_WIDTH == 800 && LCD_HEIGHT == 480)
#define LCD_TIMING_VBP		1
#define LCD_TIMING_VFP		1
#define LCD_TIMING_VSW		30
#define LCD_TIMING_HBP		50
#define LCD_TIMING_HFP		50
#define LCD_TIMING_HSW		180
#define LCD_CLK_FREQ		35000000
#elif (LCD_WIDTH == 1280 && LCD_HEIGHT == 720)
#define LCD_TIMING_VBP		5
#define LCD_TIMING_VFP		65
#define LCD_TIMING_VSW		2
#define LCD_TIMING_HBP		16
#define LCD_TIMING_HFP		42
#define LCD_TIMING_HSW		2
#define LCD_CLK_FREQ		60000000
#elif (LCD_WIDTH == 1280 && LCD_HEIGHT == 480)
#define LCD_TIMING_VBP		5
#define LCD_TIMING_VFP		8
#define LCD_TIMING_VSW		3
#define LCD_TIMING_HBP		16
#define LCD_TIMING_HFP		26
#define LCD_TIMING_HSW		12
#define LCD_CLK_FREQ		40000000
#elif (LCD_WIDTH == 480 && LCD_HEIGHT == 1280)
#define LCD_TIMING_VBP		6// 14
#define LCD_TIMING_VFP		6// 16
#define LCD_TIMING_VSW		16// 2
#define LCD_TIMING_HBP		16
#define LCD_TIMING_HFP		36
#define LCD_TIMING_HSW		26
#define LCD_CLK_FREQ		50000000
#elif (LCD_WIDTH == 480 && LCD_HEIGHT == 960)
#define LCD_TIMING_VBP		20//10
#define LCD_TIMING_VFP		20//30
#define LCD_TIMING_VSW		10
#define LCD_TIMING_HBP		30//5
#define LCD_TIMING_HFP		40//10
#define LCD_TIMING_HSW		10
#define LCD_CLK_FREQ		33330000
#else
#error "no lcd timing configuraion."
#endif
/*******************************************/

/************ adc configuration ************/
//#define ADC_TOUCH
#define ADC_KEY
/*******************************************/

/******* video in configuration *******/
#define VIDEO_DECODER_RN6752
//#define VIDEO_DECODER_ARK7116
#define VIN_CVBS_PAL		0
#define VIN_CVBS_NTSC		1
#define VIN_AHD_720P_25		2
#define VIN_AHD_720P_30    	3
#define VIDEO_IN_FORMAT		VIN_CVBS_NTSC
#if VIDEO_IN_FORMAT == VIN_CVBS_PAL
#define VIN_WIDTH		720
#define VIN_HEIGHT		288
#elif VIDEO_IN_FORMAT == VIN_CVBS_NTSC
#define VIN_WIDTH		720
#define VIN_HEIGHT		240
#elif VIDEO_IN_FORMAT == VIN_AHD_720P_25 || VIDEO_IN_FORMAT == VIN_AHD_720P_30
#define VIN_WIDTH		1280
#define VIN_HEIGHT		720
#endif
#if VIN_WIDTH * VIN_HEIGHT > 0x96000
#define VIN_SMALL_MEM
#endif
/*******************************************/

/************ carback configuration ********/
//#define CARBACK_DETECT
/*******************************************/

/********* touchscreen configuration *******/
//#define TP_SUPPORT

#ifdef TP_SUPPORT
/* Select one tp IC */
//#define TP_USE_GT9XX
//#define TP_USE_GA657X
//#define TP_USE_FT6336U

/* Config tp parameters */
#define TP_GPIO_INT			4
#define TP_GPIO_RST			5
#define TP_INV_X			0
#define TP_INV_Y			0
#define TP_INV_XY_AXIS		0	//翻转XY轴
#define TP_MT_TOUCH			0	//支持多点触摸
#endif
/*******************************************/

/*********** sdmmc configuration ***********/
#define SDMMC_SUPPORT    //SD卡软件宏 WIF模块会调用
/*******************************************/

/*********** uart configuration ************/
//240719 lj
#define UART_BT_PORT		        3//蓝牙通讯串口3
#define UART_MCU_PORT		        2//通话蓝牙与cat1通讯串口2

/*******************************************/

/************ rtc configuration ************/
#define RTC_SUPPORT
/*******************************************/

/************ remote configuration ************/
//#define REMOTE_SUPPORT
/*******************************************/

/************ pwm capture configuration ************/
//#define PWM_CAP_SUPPORT
/*******************************************/

/************ dma configuration ************/
/* the smaller channel has higher priority */
#define I2S_DMA_RXCH		0
#define I2S_DMA_TXCH		1
#define SPI0_RX_DMA_CH		2
#define SDMMC_DMA_CH		3
/*******************************************/

/************ usb configuration ************/
#define USB_SUPPORT
#define USB_MODE_ID			-1
//#define USB_DMA

//#define USB_UVC_SUPPORT
#define CONFIG_USB_DWC2_HOST		1
#define CONFIG_USB_NEW_DWC2_HOST	1
#define CONFIG_USB_DWC2_PERIPHERAL	1
#define CONFIG_USB_NEW_DWC2_GADGET	1
#if	USB_MODE_ID && USB_MODE_ID != -1
#define CONFIG_USB_DEVICE_CDC_NCM   1
#endif
/*******************************************/

/************ carlink configuration ************/
#ifdef CARLINK_ENABLE	/* define in iar options */
#define WIFI_SUPPORT
#endif

#ifdef WIFI_SUPPORT
#define CARLINK_EY         0
#define CARLINK_EC         0
#define CARLINK_CP         1
#define CARLINK_AA         1

#if !DEVICE_MXC_A27
#define WIFI_RESET_IO      12
#else
#define WIFI_RESET_IO      95
#endif

#else
#define CARLINK_EY         0
#define CARLINK_EC         0
#define CARLINK_CP         0
#define CARLINK_AA         0
#endif

#if CARLINK_EY && CARLINK_EC
#error "Do not choose two car links"
#elif (CARLINK_EY && CARLINK_CP)
#error "Do not choose two car links"
#elif (CARLINK_EY && CARLINK_AA)
#error "Do not choose two car links"
#elif (CARLINK_EC && CARLINK_CP)
// #error "Do not choose two car links"
#elif (CARLINK_EC && CARLINK_AA)
#error "Do not choose two car links"
// #elif (CARLINK_CP && CARLINK_AA)
#error "Do not choose two car links"
#endif

#define USE_LWIP           1

#if CARLINK_CP && !USE_LWIP
#error "carplay need lwip"
#endif

// #if !DEVICE_MXC_A27
// //wifi模块蓝牙复位引脚
// #define BT_RESET_IO         13
// //wifi模块使能引脚
// #define WIFI_EN_IO	        14
// #else
#define BT_RESET_IO         94
#define WIFI_EN_IO	        46
// #endif

#define BT_UART_PORT       1

//#define RELTECK_WIFI_AP_MODE
/*******************************************/

/************ i2c configuration ************/
#define HW_I2C0_SUPPORT			//Hardware i2c0 support
//#define HW_I2C1_SUPPORT			//Hardware i2c1 support
//#define ANALOG_I2C_SUPPORT		//Analog i2c support

#ifdef ANALOG_I2C_SUPPORT
#define I2C_GPIO0_SDA_PIN		102
#define I2C_GPIO0_SCL_PIN		101
#endif
/*******************************************/

/************ audio configuration ************/
#define I2S_ID0					0
#define I2S_ID1					1
#define I2S_NUMS				2

#define AUDIO_FLAG_REPLAY			1
#define AUDIO_FLAG_RECORD			2
#define AUDIO_FLAG_REPLAY_RECORD	(AUDIO_FLAG_REPLAY | AUDIO_FLAG_RECORD)

/* add your adc type */
#define AUDIO_CODEC_ADC_NONE 	0	//Not use codec adc ic or no need driver.
#define AUDIO_CODEC_ADC_ES7243E	1	//Use codec adc ic es7243e.

/* add your dac type */
#define AUDIO_CODEC_DAC_NONE	0	//Not use codec adc ic or no need driver.
#define AUDIO_CODEC_DAC_ES8156	1 	//Use codec dac ic es8156.

/* choose your audio use type */
#define AUDIO_REPLAY
#define AUDIO_RECORD

#ifdef AUDIO_REPLAY
#define AUDIO_REPLAY_I2S		I2S_ID0					/* Select i2s id */
#define AUDIO_CODEC_DAC_IC		AUDIO_CODEC_DAC_NONE	/* Select your codec dac type */
#endif

#ifdef AUDIO_RECORD
#define AUDIO_RECORD_I2S		I2S_ID1					/* Select i2s id */
#define AUDIO_CODEC_ADC_IC		AUDIO_CODEC_ADC_ES7243E	/* Select your codec adc type */
#endif

#ifndef AUDIO_CODEC_DAC_IC
#define AUDIO_CODEC_DAC_IC		AUDIO_CODEC_DAC_NONE	/* Do not use codec dac by default */
#endif

#ifndef AUDIO_CODEC_ADC_IC
#define AUDIO_CODEC_ADC_IC		AUDIO_CODEC_ADC_NONE	/* Do not use codec adc by default */
#endif
/*******************************************/


/********** romfile configuration **********/
/* 没有定义ROMFILE_USE_SMALL_MEM，romfile内容会全部加载到ddr
 * 内存不足时可以定义ROMFILE_USE_SMALL_MEM节省内存使用 */
#if !defined(VG_ONLY)
#define ROMFILE_USE_SMALL_MEM
#endif
#ifndef ROMFILE_USE_SMALL_MEM
/* 定义READ_ROMFILE_ONCE，romfile内容会整个一次加载到ddr，如果
 * 文件过大会导致启动时间慢 */
//#define READ_ROMFILE_ONCE
#else
/* 缓存在DDR里的文件数，未缓存的文件需要重新从flash里读取 */
#define ROMFILE_CACHE_DEF_SIZE	0
#endif
/*******************************************/

/********** animation configuration **********/
#define ANIMATION_NONE				0
#define ANIMATION_USE_SMALL_MEM		1
#define ANIMATION_NORMAL			2
#define ANIMATION_POLICY	ANIMATION_NORMAL
/*********************************************/

/************ flash type configuration ************/
#define SPI_NOR_FLASH				0
#define SPI_NAND_FLASH				1
#define EMMC_FLASH					2
#define DEVICE_TYPE_SELECT			SPI_NOR_FLASH
/*******************************************/

/********** update address configuration **********/
#if DEVICE_TYPE_SELECT == SPI_NAND_FLASH
#define LOADER_OFFSET				0x0
#define STEPLDRA_OFFSET				0x20000
#define STEPLDRB_OFFSET				0x40000
#define STEPLDR_MAX_SIZE			0x14000
#define SYSINFOA_MEDIA_OFFSET		0x60000
#define SYSINFOB_MEDIA_OFFSET		0x80000
#define UPDATEFILE_MEDIA_OFFSET		0xa0000
#define UPDATEFILE_MEDIA_B_OFFSET	0xc00000
#define UPDATEFILE_MAX_SIZE			0xb00000
#define OTA_MEDIA_OFFSET			0x500000
#define OTA_MEDIA_SIZE				0xa00000
#define SPI0_QSPI_MODE
#elif DEVICE_TYPE_SELECT == SPI_NOR_FLASH
#define LOADER_OFFSET				0x0
#define STEPLDRA_OFFSET				0x4000
#define STEPLDRB_OFFSET				0x20000
#define STEPLDR_MAX_SIZE			0x14000
#define SYSINFOA_MEDIA_OFFSET		0x3c000
#define SYSINFOB_MEDIA_OFFSET		0x3e000
#define UPDATEFILE_MEDIA_OFFSET		0x40000
#define UPDATEFILE_MEDIA_B_OFFSET	0xc00000
#define UPDATEFILE_MAX_SIZE			0xb00000
#define OTA_MEDIA_OFFSET			0xa00000
#define OTA_MEDIA_SIZE				0x500000
// #define SPI0_QSPI_MODE
#elif DEVICE_TYPE_SELECT == EMMC_FLASH
#define LOADER_OFFSET				0x0
#define LOADERB_OFFSET				0x100000
#define STEPLDRA_OFFSET				0x200000
#define STEPLDRB_OFFSET				0x300000
#define STEPLDR_MAX_SIZE			0x14000
#define SYSINFOA_MEDIA_OFFSET		0x400000
#define SYSINFOB_MEDIA_OFFSET		0x500000
#define UPDATEFILE_MEDIA_OFFSET		0xA00000
#define UPDATEFILE_MEDIA_B_OFFSET	0x40000000
#define UPDATEFILE_MAX_SIZE			0x1000000
#define OTA_MEDIA_OFFSET			0x80000000
#define OTA_MEDIA_SIZE				0x10000000
//#define SPI0_QSPI_MODE
#endif

/*********************************************/

/********** ulog configuration **********/
//#define USE_ULOG
#define ULOG_NAME_MAX	8
#define ULOG_LINE_BUF_SIZE	1024
#define ULOG_OUTPUT_LEVEL
#define ULOG_OUTPUT_TIME
//#define ULOG_TIME_USING_TIMESTAMP
//#define ULOG_OUTPUT_TAG
//#define ULOG_USING_COLOR
#define ULOG_USING_ISR_LOG
#define ULOG_BACKEND_USING_CONSOLE
#define ULOG_EASYFLASH_BACKEND_ENABLE
#ifdef ULOG_EASYFLASH_BACKEND_ENABLE
#define EASYFLASH_LOG
#if DEVICE_TYPE_SELECT != EMMC_FLASH
#define EASYFLASH_LOG_AREA_SIZE		0x100000
#define EASYFLASH_ERASE_GRAN		0x1000
#define EASYFLASH_WRITE_GRAN		0x100
#define EASYFLASH_START_ADDR		0x1700000
#else
#define EASYFLASH_LOG_AREA_SIZE		0x100000
#define EASYFLASH_ERASE_GRAN		0x10000
#define EASYFLASH_WRITE_GRAN		0x200
#define EASYFLASH_START_ADDR		0x60000000
#endif
#endif
//#define ULOG_FILE_BACKEND_ENABLE
#ifdef ULOG_FILE_BACKEND_ENABLE
#if DEVICE_TYPE_SELECT != EMMC_FLASH
#define ULOG_FILE_ROOT_PATH			"/sf/logs"
#else
#define ULOG_FILE_ROOT_PATH			"/sd/logs"
#endif
#define ULOG_FILE_NAME_BASE  		"ulog.log"
#define ULOG_FILE_MAX_NUM    		10
#define ULOG_FILE_MAX_SIZE   		(1024 * 32)
#endif
//#define ULOG_USING_ASYNC_OUTPUT
#define ULOG_ASYNC_OUTPUT_BUF_SIZE	1024
#define ULOG_ASYNC_OUTPUT_THREAD_STACK	2048
#define ULOG_ASYNC_OUTPUT_THREAD_PRIORITY	10
/*********************************************/

/********** update address configuration **********/
#define OTA_UPDATE_SUPPORT
#ifdef OTA_UPDATE_SUPPORT
//#define WIFI_UPDATE_SUPPORT
#if defined(WIFI_UPDATE_SUPPORT) && !defined(USB_SUPPORT)
#error "Error! Should define USB_SUPPORT to support wifi simu update"
#endif
//#define NCM_UPDATE_SUPPORT
#if defined(NCM_UPDATE_SUPPORT) && !CONFIG_USB_DEVICE_CDC_NCM
#error "Error! Should define CONFIG_USB_DEVICE_CDC_NCM=1 to support ncm update"
#endif
//#define NCM_LOG_SUPPORT
#if defined(NCM_LOG_SUPPORT) && !CONFIG_USB_DEVICE_CDC_NCM
#error "Error! Should define CONFIG_USB_DEVICE_CDC_NCM=1 to support ncm log"
#endif
#endif
/*********************************************/

void VideoDisplayBufInit(void);
int xVideoDisplayBufTake(uint32_t xTicksToWait);
void vVideoDisplayBufGive(void);
uint32_t ulVideoDisplayBufGet(void);
uint32_t ulVideoDisplayBufGetSize(void);
void vVideoDisplayBufRender(uint32_t buf_addr);
void vVideoDisplayBufFree(uint32_t buf_addr);
unsigned int ulVideoDisplayGetBufferAddr(int index);

#ifdef VIDEO_DECODER_RN6752
int rn6752_init(void);
#endif
#ifdef VIDEO_DECODER_ARK7116
int ark7116_init();
#endif

#ifdef SDMMC_SUPPORT
int mmcsd_core_init(void);
int mmc_init(void);
#endif

int carback_init(void);
void notify_enter_carback(void);
void notify_exit_carback(void);
int get_carback_status(void);

#endif