/****************************************************************************** * Copyright (c) 2013-2016 Realtek Semiconductor Corp. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. ******************************************************************************/ #ifndef WLANCONFIG_H #define WLANCONFIG_H /* * Include user defined options first. Anything not defined in these files * will be set to standard values. Override anything you dont like! */ #include "rtwlan_config.h" /* * Public General Config ****************************************************** */ #ifndef DRV_NAME #define DRV_NAME "undefine" #endif #ifndef DRIVERVERSION #define DRIVERVERSION "undefine" #endif #ifndef CONFIG_PLATFOMR_CUSTOMER_RTOS #define PLATFORM_FREERTOS #else #define PLATFORM_CUSTOMER_RTOS #define CONFIG_LWIP_LAYER 0 #endif #ifndef CONFIG_LWIP_LAYER #define CONFIG_LWIP_LAYER 1 #endif #ifndef CONFIG_LITTLE_ENDIAN #define CONFIG_LITTLE_ENDIAN 1 // 0 for CONFIG_BIG_ENDIAN #endif /* * Performance and Size Related Config **************************************** */ //CONFIG_THROUGHPUT_LEVEL must set according to customer plaftorm or device, not means that the value of CONFIG_THROUGHPUT_LEVEL is bigger, the throughput is higher. //CONFIG_THROUGHPUT_LEVEL == 1 MAX_TX_SKB_DATA_NUM=7 MAX_RX_SKB_DATA_NUM=1 //CONFIG_THROUGHPUT_LEVEL == 2 MAX_TX_SKB_DATA_NUM=15 MAX_RX_SKB_DATA_NUM=1 if no log "Wait for tx skbdata", no need to use CONFIG_THROUGHPUT_LEVEL 2 //CONFIG_THROUGHPUT_LEVEL == 3 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 if no log "Wait for tx skbdata", no need to use CONFIG_THROUGHPUT_LEVEL 3 //CONFIG_THROUGHPUT_LEVEL == 4 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 CONFIG_TX_BUS_AGG_NUM=3 CONFIG_RX_BUS_AGG_NUM=5 RX_AGGREGATION=1 //CONFIG_THROUGHPUT_LEVEL == 5 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 CONFIG_TX_BUS_AGG_NUM=5 CONFIG_RX_BUS_AGG_NUM=8 RX_AGGREGATION=1 #if !defined(CONFIG_THROUGHPUT_LEVEL) || (CONFIG_THROUGHPUT_LEVEL == 0) #undef CONFIG_THROUGHPUT_LEVEL #define CONFIG_THROUGHPUT_LEVEL 1 //1 2 3 4 5 #endif #if !defined(CONFIG_TX_BUS_AGG_NUM) || (CONFIG_TX_BUS_AGG_NUM == 0) #if (CONFIG_THROUGHPUT_LEVEL == 4) #define CONFIG_TX_BUS_AGG_NUM 3 #elif (CONFIG_THROUGHPUT_LEVEL == 5) #define CONFIG_TX_BUS_AGG_NUM 5 #else #define CONFIG_TX_BUS_AGG_NUM 1 //1 3 5 8 #endif #endif //CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA is used to decrease the TX buf size if CONFIG_TX_BUS_AGG_NUM>1, will decrease tx throughput, default disable. #if !defined(CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA) #define CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA 0 #endif #if (CONFIG_TX_BUS_AGG_NUM == 1) && CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA #error "no need to enable CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA" #endif //CONFIG_USE_EXT_RX_REORDER_SKB_DATA is used to decrease the RX buf size if enable CONFIG_RECV_REORDERING_CTRL, will decrease RX throughput, default disable. #if !defined(CONFIG_USE_EXT_RX_REORDER_SKB_DATA) #define CONFIG_USE_EXT_RX_REORDER_SKB_DATA 0 #endif #if !defined(CONFIG_RX_BUS_AGG_NUM) || (CONFIG_RX_BUS_AGG_NUM == 0) #if (CONFIG_THROUGHPUT_LEVEL == 4) #define CONFIG_RX_BUS_AGG_NUM 5 #elif (CONFIG_THROUGHPUT_LEVEL == 5) #define CONFIG_RX_BUS_AGG_NUM 8 #else #define CONFIG_RX_BUS_AGG_NUM 1 //1 3 5 8 #endif #endif #if (!defined(RX_AGGREGATION) || !RX_AGGREGATION) && (CONFIG_RX_BUS_AGG_NUM > 1) #define RX_AGGREGATION 1 #endif #if !RX_AGGREGATION && CONFIG_RECV_REORDERING_CTRL #error "no need to enable CONFIG_RECV_REORDERING_CTRL" #endif #ifndef USE_XMIT_EXTBUFF #define USE_XMIT_EXTBUFF 0 #endif #ifndef CONFIG_RX_SHORTCUT #define CONFIG_RX_SHORTCUT 0 #endif // remove function to reduce code #if !defined(CONFIG_HARDWARE_8821C) && !defined(CONFIG_HARDWARE_8723F) #define NOT_SUPPORT_5G 1 #else #define NOT_SUPPORT_5G 0 #endif #define SUPPORT_5G_CHANNEL (NOT_SUPPORT_5G ? 0 : 1) #if !defined(CONFIG_HARDWARE_8192E) && !defined(CONFIG_HARDWARE_8192F) #define NOT_SUPPORT_RF_MULTIPATH 1 #else #define NOT_SUPPORT_RF_MULTIPATH 0 #endif #ifndef NOT_SUPPORT_VHT #define NOT_SUPPORT_VHT 1 #endif #ifndef NOT_SUPPORT_80M #define NOT_SUPPORT_80M 1 #endif #ifndef NOT_SUPPORT_40M #define NOT_SUPPORT_40M 1 #endif #ifndef NOT_SUPPORT_OLD_CHANNEL_PLAN #define NOT_SUPPORT_OLD_CHANNEL_PLAN 1 #endif #ifndef NOT_SUPPORT_BT #define NOT_SUPPORT_BT 1 #endif /* * Hareware/Firmware Related Config ******************************************* */ #ifndef CONFIG_FW_C2H_PKT #define CONFIG_FW_C2H_PKT 1 #endif #ifndef PHYDM_LINUX_CODING_STYLE #define PHYDM_LINUX_CODING_STYLE 1 #endif #ifndef PHYDM_NEW_INTERFACE #define PHYDM_NEW_INTERFACE (PHYDM_LINUX_CODING_STYLE ? 1 : 0) #endif #ifndef RTW_NOTCH_FILTER #define RTW_NOTCH_FILTER 0 #endif #ifndef CONFIG_EMBEDDED_FWIMG #define CONFIG_EMBEDDED_FWIMG 1 #endif #ifndef CONFIG_PHY_SETTING_WITH_ODM #define CONFIG_PHY_SETTING_WITH_ODM 1 #endif #ifndef HAL_MAC_ENABLE #define HAL_MAC_ENABLE 1 #endif #ifndef HAL_BB_ENABLE #define HAL_BB_ENABLE 1 #endif #ifndef HAL_RF_ENABLE #define HAL_RF_ENABLE 1 #endif #ifndef CONFIG_FAKE_EFUSE #define CONFIG_FAKE_EFUSE 0 #endif #ifndef CONFIG_RF_POWER_TRIM #define CONFIG_RF_POWER_TRIM 0 #endif #define RTL8192E_SUPPORT 0 #define RTL8812A_SUPPORT 0 #define RTL8821A_SUPPORT 0 #define RTL8723B_SUPPORT 0 #define RTL8188E_SUPPORT 0 #define RTL8188F_SUPPORT 0 #define RTL8821C_SUPPORT 0 #define RTL8723D_SUPPORT 0 #define RTL8192F_SUPPORT 0 #define RTL8723F_SUPPORT 0 /* For DM support */ #ifndef RATE_ADAPTIVE_SUPPORT #define RATE_ADAPTIVE_SUPPORT 0 #endif #ifndef CONFIG_ODM_REFRESH_RAMASK #define CONFIG_ODM_REFRESH_RAMASK 0 #endif #if defined(CONFIG_HARDWARE_8188F) #define CONFIG_RTL8188F #undef RTL8188F_SUPPORT #define RTL8188F_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8192E) #define CONFIG_RTL8192E #undef RTL8192E_SUPPORT #define RTL8192E_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8821C) #define CONFIG_RTL8821C #undef RTL8821C_SUPPORT #define RTL8821C_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8723F) #define CONFIG_RTL8723F #undef RTL8723F_SUPPORT #define RTL8723F_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8723D) #define CONFIG_RTL8723D #undef RTL8723D_SUPPORT #define RTL8723D_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8723B) #define CONFIG_RTL8723B #undef RTL8723B_SUPPORT #define RTL8723B_SUPPORT 1 #elif defined(CONFIG_HARDWARE_8703B) #define CONFIG_RTL8703B #undef RTL8703B_SUPPORT #define RTL8703B_SUPPORT 1 #define CONFIG_BT_COEXIST 1 #elif defined(CONFIG_HARDWARE_8192F) #define CONFIG_RTL8192F #undef RTL8192F_SUPPORT #define RTL8192F_SUPPORT 1 #else #define CONFIG_RTL8188E #undef RTL8188E_SUPPORT #define RTL8188E_SUPPORT 1 #undef RATE_ADAPTIVE_SUPPORT #define RATE_ADAPTIVE_SUPPORT 1 #endif #if defined(CONFIG_RTL8723F) || defined(CONFIG_RTL8821C) #ifndef LOAD_FW_HEADER_FROM_DRIVER #define LOAD_FW_HEADER_FROM_DRIVER 1 #endif #ifndef CONFIG_NO_FW #define CONFIG_NO_FW 0 #endif #ifndef RTW_HALMAC #define RTW_HALMAC 1 #endif #ifndef RTW_HALMAC_SIZE_OPTIMIZATION #define RTW_HALMAC_SIZE_OPTIMIZATION 1 #endif #if CONFIG_CONCURRENT_MODE #define CONFIG_AP_PORT_SWAP 1 #endif #else #if RTW_HALMAC || LOAD_FW_HEADER_FROM_DRIVER || RTW_HALMAC_SIZE_OPTIMIZATION || SUPPORT_5G_CHANNEL #error "CONFIG_HARDWARE_8821C has not been defined, define CONFIG_HARDWARE_8821C firstly" #endif #endif #ifdef CONFIG_HARDWARE_8723F //#define CONFIG_TCP_CSUM_OFFLOAD_RX //#define CONFIG_RTS_FULL_BW //#if !CONFIG_TXPWR_LIMIT && CONFIG_TXPWR_LIMIT_EN // #undef CONFIG_TXPWR_LIMIT // #define CONFIG_TXPWR_LIMIT 1 //#endif /* #ifdef CONFIG_NO_FW #ifdef CONFIG_RTW_MAC_HIDDEN_RPT #undef CONFIG_RTW_MAC_HIDDEN_RPT #endif #else #ifndef CONFIG_RTW_MAC_HIDDEN_RPT #define CONFIG_RTW_MAC_HIDDEN_RPT #endif #endif */ //#define CONFIG_WRITE_BCN_LEN_TO_FW #if CONFIG_WOWLAN #define CONFIG_WOW_PATTERN_IN_TXFIFO 1 #endif #ifndef DISABLE_BB_RF #define DISABLE_BB_RF 0 #endif #ifndef CONFIG_HALMAC_CODESIZE #define CONFIG_HALMAC_CODESIZE 0 #endif #ifndef CONFIG_TXPWR_PG_WITH_TSSI_OFFSET #define CONFIG_TXPWR_PG_WITH_TSSI_OFFSET #endif #endif #ifdef CONFIG_HARDWARE_8821C #ifndef FW_IQK #define FW_IQK 1 #endif #ifndef CONFIG_80211AC_VHT #define CONFIG_80211AC_VHT 0 #endif #if CONFIG_80211AC_VHT #ifndef CONFIG_PHY_CAPABILITY_QUERY #define CONFIG_PHY_CAPABILITY_QUERY 1 #endif #if NOT_SUPPORT_VHT #define NOT_SUPPORT_VHT 0 #endif #if !CONFIG_80211N_HT #define CONFIG_80211N_HT 1 #endif #if NOT_SUPPORT_40M #define NOT_SUPPORT_40M 0 #endif #if NOT_SUPPORT_80M #define NOT_SUPPORT_80M 0 #endif #endif #ifndef CONFIG_IO_CHECK_IN_ANA_LOW_CLK #define CONFIG_IO_CHECK_IN_ANA_LOW_CLK 1 #endif #endif /* * Wi-Fi Functions Config ***************************************************** */ #ifndef CONFIG_PLATFOMR_CUSTOMER_RTOS // local default: support WPA3 #ifndef CONFIG_PMKSA_CACHING #define CONFIG_PMKSA_CACHING 1 #endif #ifndef CONFIG_IEEE80211W #define CONFIG_IEEE80211W 1 #endif #ifndef CONFIG_SAE_SUPPORT #define CONFIG_SAE_SUPPORT 1 #endif #else #ifndef CONFIG_PMKSA_CACHING #define CONFIG_PMKSA_CACHING 0 #endif #ifndef CONFIG_IEEE80211W #define CONFIG_IEEE80211W 0 #endif #ifndef CONFIG_SAE_SUPPORT #define CONFIG_SAE_SUPPORT 0 #endif #endif // end CONFIG_PLATFOMR_CUSTOMER_RTOS #if CONFIG_SAE_SUPPORT #define CONFIG_SAE_DH_SUPPORT 1 //#define ALL_DH_GROUPS #endif #ifndef CONFIG_80211N_HT #define CONFIG_80211N_HT 1 #endif /* for 802.11-K,V,R */ #ifndef CONFIG_IEEE80211K #define CONFIG_IEEE80211K 0 #endif #ifndef CONFIG_LAYER2_ROAMING #define CONFIG_LAYER2_ROAMING 0 #if (CONFIG_RTW_WNM || CONFIG_IEEE80211R) #error "CONFIG_LAYER2_ROAMING has not been defined, define CONFIG_LAYER2_ROAMING firstly" #endif #endif #ifndef CONFIG_RTW_WNM #define CONFIG_RTW_WNM 0 #endif #ifndef CONFIG_IEEE80211R #define CONFIG_IEEE80211R 0 #endif #ifndef CONFIG_RECV_REORDERING_CTRL #define CONFIG_RECV_REORDERING_CTRL 0 #endif #if !CONFIG_RECV_REORDERING_CTRL && CONFIG_USE_EXT_RX_REORDER_SKB_DATA #error "no need to enable CONFIG_USE_EXT_RX_REORDER_SKB_DATA" #endif #if CONFIG_RECV_REORDERING_CTRL && CONFIG_RX_SHORTCUT #error "CONFIG_RECV_REORDERING_CTRL and CONFIG_RX_SHORTCUT can't be enabled together!" #endif #if CONFIG_RECV_REORDERING_CTRL && !defined(REORDER_WSIZE) #define REORDER_WSIZE 32 #endif #if CONFIG_RECV_REORDERING_CTRL && !defined(REORDER_WAIT_TIME) #define REORDER_WAIT_TIME (30) // (ms) #endif /* For PS */ #ifndef CONFIG_POWER_SAVING #define CONFIG_POWER_SAVING 0 #endif #if CONFIG_POWER_SAVING #ifndef CONFIG_IPS #define CONFIG_IPS 1 #endif #if CONFIG_IPS #define CONFIG_IPS_LEVEL_2 0//0:normal ips; 1: keepfwalive #endif #ifndef CONFIG_LPS #define CONFIG_LPS 1 #endif #if CONFIG_LPS && !defined(CONFIG_LPS_CHK_BY_TP) #define CONFIG_LPS_CHK_BY_TP 1 #endif #ifndef CONFIG_LPS_LCLK #define CONFIG_LPS_LCLK 0 #endif #if CONFIG_LPS_LCLK && !defined(CONFIG_DETECT_CPWM_BY_POLLING) #define CONFIG_DETECT_CPWM_BY_POLLING 1 #endif #if CONFIG_LPS_LCLK && !defined(LPS_RPWM_WAIT_MS) #define LPS_RPWM_WAIT_MS 300 #endif #ifndef CONFIG_WAIT_PS_ACK #define CONFIG_WAIT_PS_ACK 1 #endif #ifndef CONFIG_FW_PSTIMEOUT #define CONFIG_FW_PSTIMEOUT 1 #endif #else #if CONFIG_IPS || CONFIG_LPS #error "CONFIG_POWER_SAVING has not been defined, define CONFIG_POWER_SAVING firstly" #endif #endif #if !CONFIG_LPS && CONFIG_LPS_LCLK #error "CONFIG_LPS has not been defined, define CONFIG_LPS firstly" #endif #if !CONFIG_LPS_LCLK && CONFIG_DETECT_CPWM_BY_POLLING #error "CONFIG_LPS_LCLK has not been defined, define CONFIG_LPS_LCLK firstly" #endif #ifndef CONFIG_AUTO_RECONNECT #define CONFIG_AUTO_RECONNECT 1 #endif /* For WPA2 */ #ifndef CONFIG_INCLUDE_WPA_PSK #define CONFIG_INCLUDE_WPA_PSK 1 #endif #if CONFIG_INCLUDE_WPA_PSK #ifndef CONFIG_MULTIPLE_WPA_STA #define CONFIG_MULTIPLE_WPA_STA 1 #endif #ifndef CONFIG_WPA2_PREAUTH #define CONFIG_WPA2_PREAUTH 0 #endif #ifndef PSK_SUPPORT_TKIP #define PSK_SUPPORT_TKIP 1 #endif #ifndef CONFIG_PTK_REKEY #define CONFIG_PTK_REKEY 0 #endif #if CONFIG_PTK_REKEY #define CONFIG_XMIT_ACK #endif #else #if CONFIG_MULTIPLE_WPA_STA || PSK_SUPPORT_TKIP || CONFIG_PTK_REKEY #error "CONFIG_INCLUDE_WPA_PSK has not been defined, define CONFIG_INCLUDE_WPA_PSK firstly" #endif #endif /* For promiscuous mode */ #ifndef CONFIG_PROMISC #define CONFIG_PROMISC 0 #endif #ifndef PROMISC_DENY_PAIRWISE #define PROMISC_DENY_PAIRWISE 0 #endif /* For Simple Link */ #ifndef CONFIG_INCLUDE_SIMPLE_CONFIG #define CONFIG_INCLUDE_SIMPLE_CONFIG 0 #endif // for probe request with custom vendor specific IE #ifndef CONFIG_CUSTOM_IE #define CONFIG_CUSTOM_IE 1 #endif /* For multicast */ #ifndef CONFIG_MULTICAST #define CONFIG_MULTICAST 0 #endif /* For STA+AP Concurrent MODE */ #ifndef CONFIG_CONCURRENT_MODE #define CONFIG_CONCURRENT_MODE 0 #endif #if CONFIG_CONCURRENT_MODE #ifndef CONFIG_MCC_MODE #define CONFIG_MCC_MODE 0 #endif #ifndef CONFIG_RUNTIME_PORT_SWITCH #if defined(CONFIG_HARDWARE_8723D) || defined(CONFIG_HARDWARE_8188F) #define CONFIG_RUNTIME_PORT_SWITCH 1 #else #define CONFIG_RUNTIME_PORT_SWITCH 0 #endif #endif #else #if CONFIG_RUNTIME_PORT_SWITCH || CONFIG_MCC_MODE #error "CONFIG_CONCURRENT_MODE has not been defined, define CONFIG_CONCURRENT_MODE firstly" #endif #endif #ifndef NET_IF_NUM #define NET_IF_NUM (CONFIG_CONCURRENT_MODE ? 2 : 1) #endif /******** For EAP auth configurations *********/ #ifndef PRE_CONFIG_EAP #define PRE_CONFIG_EAP 0 #endif // DO NOT change the below config of EAP #ifndef CONFIG_TLS #define CONFIG_TLS (PRE_CONFIG_EAP ? 1 : 0) #endif #ifndef CONFIG_PEAP #define CONFIG_PEAP (PRE_CONFIG_EAP ? 1 : 0) #endif #ifndef CONFIG_TTLS #define CONFIG_TTLS (PRE_CONFIG_EAP ? 1 : 0) #endif // enable 1X code in lib_wlan as default (increase 380 bytes) #ifndef CONFIG_EAP #define CONFIG_EAP 0 #endif #ifndef EAP_REMOVE_UNUSED_CODE #define EAP_REMOVE_UNUSED_CODE ((CONFIG_TLS || CONFIG_PEAP || CONFIG_TTLS) ? 1 : 0) #endif #ifndef EAP_SSL_VERIFY_SERVER #define EAP_SSL_VERIFY_SERVER 1 #endif #if CONFIG_TLS && !defined(EAP_SSL_VERIFY_CLIENT) #define EAP_SSL_VERIFY_CLIENT 1 #endif #if CONFIG_TTLS #ifndef EAP_MSCHAPv2 #define EAP_MSCHAPv2 1 #endif #ifndef EAP_TTLS_MSCHAPv2 #define EAP_TTLS_MSCHAPv2 1 #endif #ifndef EAP_TTLS_EAP #define EAP_TTLS_EAP 0 #endif #ifndef EAP_TTLS_MSCHAP #define EAP_TTLS_MSCHAP 0 #endif #ifndef EAP_TTLS_PAP #define EAP_TTLS_PAP 0 #endif #ifndef EAP_TTLS_CHAP #define EAP_TTLS_CHAP 0 #endif #else #if EAP_MSCHAPv2 || EAP_TTLS_MSCHAPv2 #error "CONFIG_TTLS has not been defined, define CONFIG_TTLS firstly" #endif #endif /******** End of EAP configurations *********/ #ifndef SUPPORT_SCAN_BUF #define SUPPORT_SCAN_BUF 1 #endif /* For WPS and P2P */ #ifndef CONFIG_WPS #define CONFIG_WPS 0 #endif #if CONFIG_WPS #define CONFIG_ENABLE_WPS 1 #endif #if CONFIG_ENABLE_WPS #define WPS_CONNECT_RETRY_COUNT 4 #define WPS_CONNECT_RETRY_INTERVAL 5000 // in ms #endif #ifndef CONFIG_WPS_AP #define CONFIG_WPS_AP 0 #endif #ifndef CONFIG_P2P_NEW #define CONFIG_P2P_NEW 0 #endif #if (!SUPPORT_SCAN_BUF || !CONFIG_WPS_AP) && CONFIG_P2P_NEW #error "If CONFIG_P2P_NEW, need to SUPPORT_SCAN_BUF" #endif /* For AP_MODE */ #ifndef CONFIG_AP_MODE #define CONFIG_AP_MODE 1 #endif #if (CONFIG_AP_MODE == 1) && (CONFIG_THROUGHPUT_LEVEL == 1) #undef CONFIG_THROUGHPUT_LEVEL #define CONFIG_THROUGHPUT_LEVEL 3 //ap mode default use 3 #endif extern unsigned char g_user_ap_sta_num; extern unsigned int g_ap_sta_num; #define USER_AP_STA_NUM g_user_ap_sta_num #if !defined(AP_STA_NUM) #define AP_STA_NUM 3 // g_ap_sta_num #endif #if CONFIG_AP_MODE extern unsigned char g_user_ap_expire_to; #ifndef CONFIG_EXPIRE_TO #define CONFIG_EXPIRE_TO g_user_ap_expire_to #endif #ifndef CONFIG_NATIVEAP_MLME #define CONFIG_NATIVEAP_MLME 1 #endif #ifndef CONFIG_INTERRUPT_BASED_TXBCN #define CONFIG_INTERRUPT_BASED_TXBCN 0 #endif #if CONFIG_INTERRUPT_BASED_TXBCN #ifndef CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT #define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT 0 #endif #ifndef CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR 1 #endif #endif #ifndef CONFIG_GK_REKEY #define CONFIG_GK_REKEY 0 #endif #else #if CONFIG_NATIVEAP_MLME #error "CONFIG_AP_MODE has not been defined, define CONFIG_AP_MODE firstly" #endif #endif #if !CONFIG_INTERRUPT_BASED_TXBCN && CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR #error "CONFIG_INTERRUPT_BASED_TXBCN has not been defined, define CONFIG_INTERRUPT_BASED_TXBCN firstly" #endif #ifndef USE_DEDICATED_BCN_TX #define USE_DEDICATED_BCN_TX (CONFIG_AP_MODE ? 1 : 0) #endif #if CONFIG_AP_MODE && CONFIG_GK_REKEY && !CONFIG_MULTIPLE_WPA_STA #error "If CONFIG_GK_REKEY when CONFIG_AP_MODE, need to CONFIG_MULTIPLE_WPA_STA" #endif #if !CONFIG_AP_MODE && CONFIG_CONCURRENT_MODE #error "If CONFIG_CONCURRENT_MODEE, need to CONFIG_AP_MODE" #endif /* For MP_MODE */ #ifndef CONFIG_MP_INCLUDED #define CONFIG_MP_INCLUDED 0 #endif #ifndef HAL_EFUSE_MEMORY #define HAL_EFUSE_MEMORY 0 #endif #if CONFIG_MP_INCLUDED #ifndef CONFIG_MP_IWPRIV_SUPPORT #define CONFIG_MP_IWPRIV_SUPPORT 1 #endif #ifdef HAL_EFUSE_MEMORY #undef HAL_EFUSE_MEMORY #endif #if defined(CONFIG_RTL8723D) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8723F) || defined(CONFIG_RTL8188F) #define HAL_EFUSE_MEMORY 1 #else #define HAL_EFUSE_MEMORY 0 #endif #ifndef CONFIG_MP_NORMAL_IWPRIV_SUPPORT #define CONFIG_MP_NORMAL_IWPRIV_SUPPORT 0 #endif #else #if CONFIG_MP_IWPRIV_SUPPORT || HAL_EFUSE_MEMORY || CONFIG_MP_NORMAL_IWPRIV_SUPPORT #error "CONFIG_MP_INCLUDED has not been defined, define CONFIG_MP_INCLUDED firstly" #endif #endif #ifndef MP_DRIVER #define MP_DRIVER (CONFIG_MP_INCLUDED ? 1 : 0) #endif #ifndef CONFIG_MAC_ADDRESS #define CONFIG_MAC_ADDRESS 0 #endif #ifndef CONFIG_WOWLAN #define CONFIG_WOWLAN 0 #endif #if CONFIG_WOWLAN #ifndef CONFIG_WOWLAN_HW_CAM #define CONFIG_WOWLAN_HW_CAM 1 #endif #ifndef CONFIG_SUSPEND #define CONFIG_SUSPEND 1 #endif #ifndef CONFIG_RTW_SDIO_KEEP_IRQ #define CONFIG_RTW_SDIO_KEEP_IRQ 0 #endif #ifndef CONFIG_GPIO_WAKEUP #define CONFIG_GPIO_WAKEUP 1 #endif #ifndef CONFIG_WOWLAN_AWAKE_PATTERN #define CONFIG_WOWLAN_AWAKE_PATTERN 1//1:icmp awake 2:tcp udp unicast awake 3:tcp unicast awake #endif #ifndef CONFIG_WOWLAN_AWAKE_FAST_ENTER_PS #define CONFIG_WOWLAN_AWAKE_FAST_ENTER_PS 0 #endif #ifndef CONFIG_DECREASE_POWER_CONSUMPTION_IN_WOWLAN #define CONFIG_DECREASE_POWER_CONSUMPTION_IN_WOWLAN 0 #endif #ifndef CONFIG_WOWLAN_AWAKE_PATTERN_TCP_PORT #define CONFIG_WOWLAN_AWAKE_PATTERN_TCP_PORT 0 #endif #else #if CONFIG_SUSPEND || CONFIG_RTW_SDIO_KEEP_IRQ || CONFIG_GPIO_WAKEUP || CONFIG_WOWLAN_AWAKE_PATTERN #error "CONFIG_WOWLAN has not been defined, define CONFIG_WOWLAN firstly" #endif #endif #ifndef CONFIG_DFS #define CONFIG_DFS 1 #endif // adaptivity #define RTW_ADAPTIVITY_EN_DISABLE 0 #define RTW_ADAPTIVITY_EN_ENABLE 1 #ifndef CONFIG_RTW_ADAPTIVITY_EN #define CONFIG_RTW_ADAPTIVITY_EN RTW_ADAPTIVITY_EN_DISABLE #endif #define RTW_ADAPTIVITY_MODE_NORMAL 0 #define RTW_ADAPTIVITY_MODE_CARRIER_SENSE 1 #ifndef CONFIG_RTW_ADAPTIVITY_MODE #define CONFIG_RTW_ADAPTIVITY_MODE RTW_ADAPTIVITY_MODE_NORMAL #endif #ifndef CONFIG_RTW_ADAPTIVITY_DML #define CONFIG_RTW_ADAPTIVITY_DML 0 #endif #ifndef POWER_BY_RATE_SUPPORT #define POWER_BY_RATE_SUPPORT 0 #endif #ifndef ENABLE_POWER_BY_RATE #define ENABLE_POWER_BY_RATE 2 #endif #ifndef CONFIG_TXPWR_LIMIT #define CONFIG_TXPWR_LIMIT 0 #endif #ifndef CONFIG_EMPTY_EFUSE_PG_ENABLE #define CONFIG_EMPTY_EFUSE_PG_ENABLE 0 #endif #ifndef CONFIG_RETRY_LIMIT #define CONFIG_RETRY_LIMIT 48 #endif /* * Interface Related Config *************************************************** */ #if defined(USE_SDIO_INTERFACE) #define CONFIG_SDIO_HCI #elif defined(USE_USB_INTERFACE) #define CONFIG_USB_HCI #else #define CONFIG_GSPI_HCI #endif #ifndef CONFIG_USB_TX_NUM_ENABLE #ifdef CONFIG_USB_HCI #define CONFIG_USB_TX_NUM_ENABLE 0 #endif #endif #ifndef CONFIG_USB_TX_AGGREGATION #if CONFIG_USB_TX_NUM_ENABLE #define CONFIG_USB_TX_AGGREGATION 1 #endif #endif #ifndef CONFIG_USB_RX_AGGREGATION #ifdef CONFIG_USB_HCI #define CONFIG_USB_RX_AGGREGATION 0 #endif #endif #if defined(CONFIG_USB_HCI) && (!CONFIG_USB_RX_AGGREGATION) && (CONFIG_RX_BUS_AGG_NUM > 1) #define CONFIG_USB_RX_AGGREGATION 1 #endif #if defined(CONFIG_USB_HCI) && (!CONFIG_USB_TX_AGGREGATION) && (CONFIG_TX_BUS_AGG_NUM > 1) #error "no need to increase CONFIG_TX_BUS_AGG_NUM, CONFIG_USB_TX_AGGREGATION is not enabled" #endif #ifndef CONFIG_XMIT_THREAD_MODE #ifdef CONFIG_SDIO_HCI #define CONFIG_XMIT_THREAD_MODE 1 #else #define CONFIG_XMIT_THREAD_MODE 0 #endif #endif #ifndef CONFIG_RECV_THREAD_MODE #ifdef CONFIG_USB_HCI #define CONFIG_RECV_THREAD_MODE 1 /* Wlan IRQ Polling Mode*/ #else #define CONFIG_RECV_THREAD_MODE 0 /* Wlan IRQ Polling Mode*/ #endif #endif #ifndef CONFIG_ISR_THREAD_MODE_POLLING #define CONFIG_ISR_THREAD_MODE_POLLING 0 /* Wlan IRQ Polling Mode*/ #endif #ifndef CONFIG_ISR_THREAD_MODE_INTERRUPT /* Wlan IRQ Interrupt Mode*/ #if !defined(CONFIG_USB_HCI) && !defined(CONFIG_SDIO_HCI) #define CONFIG_ISR_THREAD_MODE_INTERRUPT 1 #else #define CONFIG_ISR_THREAD_MODE_INTERRUPT 0 #endif #endif #if CONFIG_ISR_THREAD_MODE_POLLING && CONFIG_ISR_THREAD_MODE_INTERRUPT #error "CONFIG_ISR_THREAD_MODE_POLLING and CONFIG_ISR_THREAD_MODE_INTERRUPT are mutually exclusive. " #endif #ifndef CONFIG_RECV_TASK_THREAD_MODE #define CONFIG_RECV_TASK_THREAD_MODE 0 #endif #ifndef USE_SKB_AS_XMITBUF #ifdef CONFIG_USB_HCI #if CONFIG_USB_TX_NUM_ENABLE #define USE_SKB_AS_XMITBUF 0 #else #define USE_SKB_AS_XMITBUF 1 #endif #else #define USE_SKB_AS_XMITBUF 1 #endif #endif #ifndef CONFIG_SDIO_FW_READ_TEST #define CONFIG_SDIO_FW_READ_TEST 0 #endif /* * BT Related Config ********************************************************** */ #ifndef CONFIG_BT_EN #define CONFIG_BT_EN 0 #endif #if CONFIG_BT_EN #define CONFIG_FTL_ENABLED 1 #endif #ifndef CONFIG_BT_COEXIST #define CONFIG_BT_COEXIST 0 #endif #if CONFIG_BT_COEXIST #undef NOT_SUPPORT_BT #define NOT_SUPPORT_BT 0 #ifndef CONFIG_BT_MAILBOX #define CONFIG_BT_MAILBOX 1 #endif #ifndef CONFIG_BT_EFUSE #define CONFIG_BT_EFUSE 1 #endif #ifndef CONFIG_BT_TWO_ANTENNA #define CONFIG_BT_TWO_ANTENNA 0 #endif #ifndef CONFIG_DYNAMIC_SET_A2DP_CASE_WIFI_SLOT_PROPORTION #define CONFIG_DYNAMIC_SET_A2DP_CASE_WIFI_SLOT_PROPORTION 0 #endif #if defined(CONFIG_RTL8723F)||defined(CONFIG_RTL8821C) #define RTW_HALMAC_BT_COEX 1 #endif #else #if CONFIG_BT_MAILBOX || CONFIG_BT_EFUSE || CONFIG_BT_TWO_ANTENNA #error "CONFIG_BT_COEXIST has not been defined, define CONFIG_BT_COEXIST firstly" #endif #endif /* * Others ********************************************************************* */ #ifndef CONFIG_WIFI_CRITICAL_CODE_SECTION #define CONFIG_WIFI_CRITICAL_CODE_SECTION #endif #ifndef CONFIG_MEMORY_ACCESS_ALIGNED #define CONFIG_MEMORY_ACCESS_ALIGNED 1 #endif #ifndef BAD_MIC_COUNTERMEASURE #define BAD_MIC_COUNTERMEASURE 1 #endif #ifndef DEFRAGMENTATION #define DEFRAGMENTATION 1 #endif #ifndef WIFI_LOGO_CERTIFICATION #define WIFI_LOGO_CERTIFICATION 0 #endif #ifndef RX_AGGREGATION #define RX_AGGREGATION (WIFI_LOGO_CERTIFICATION ? 1 : 0) #endif #ifndef RX_AMSDU #define RX_AMSDU (WIFI_LOGO_CERTIFICATION ? 1 : 0) #endif #ifndef USE_MUTEX_FOR_SPINLOCK #define USE_MUTEX_FOR_SPINLOCK 1 #endif #ifndef CONFIG_WIFI_SPEC #define CONFIG_WIFI_SPEC 0 #endif #ifndef ENABLE_HWPDN_PIN #define ENABLE_HWPDN_PIN 1 #endif #ifndef BE_I_CUT #define BE_I_CUT 1 #endif #ifndef CONFIG_PASSIVESCAN_HIDDENSSID_ENABLE #define CONFIG_PASSIVESCAN_HIDDENSSID_ENABLE 0 #endif #ifndef CONFIG_NEW_SIGNAL_STAT_PROCESS #define CONFIG_NEW_SIGNAL_STAT_PROCESS 1 #endif #ifndef CONFIG_SKIP_SIGNAL_SCALE_MAPPING #define CONFIG_SKIP_SIGNAL_SCALE_MAPPING 1 #endif #ifndef CONFIG_ADDRESS_ALIGNMENT #define CONFIG_ADDRESS_ALIGNMENT 0 #endif #if CONFIG_ADDRESS_ALIGNMENT && !defined(ALIGNMENT_SIZE) #define ALIGNMENT_SIZE 4 #endif #ifndef WLAN_WRAPPER_VERSION #define WLAN_WRAPPER_VERSION 1 #endif #ifndef TIME_THRES #define TIME_THRES 20 #endif #ifndef CONFIG_TIMER_THREAD #define CONFIG_TIMER_THREAD 0 #endif #if CONFIG_TIMER_THREAD #ifndef CONFIG_TIMER_CALLBACK_FROM_ISR #define CONFIG_TIMER_CALLBACK_FROM_ISR 0 #endif #endif /* * CUSTOMER REQUEST START ******************************************************* */ /* For priority adjust*/ #ifndef CONFIG_SET_PRIORITY #define CONFIG_SET_PRIORITY 0 #endif // for ali #ifndef CONFIG_CONNECT_FAST_FEATURE #define CONFIG_CONNECT_FAST_FEATURE 0 #endif #ifndef CONFIG_NO_REFERENCE_FOR_COMPILER #define CONFIG_NO_REFERENCE_FOR_COMPILER 0 #endif #ifndef CONFIG_AVIOD_STACKFLOW_FOR_64PLATFORM #define CONFIG_AVIOD_STACKFLOW_FOR_64PLATFORM 0 #endif #ifndef CONFIG_QUICKEN_INIT #define CONFIG_QUICKEN_INIT 0 #endif #ifndef CONFIG_OPEN_LPS_ONLYFOR_BTCO #define CONFIG_OPEN_LPS_ONLYFOR_BTCO 0 #endif #ifndef CONFIG_CUSTOMIZE_PHYREG_OF_PWR_BY_RTAE_AND_LIMIT #define CONFIG_CUSTOMIZE_PHYREG_OF_PWR_BY_RTAE_AND_LIMIT 0 #endif //for ali end #ifndef NO_CALLER #define NO_CALLER 0 #endif #ifndef SHRINK_DATA_SIZE #define SHRINK_DATA_SIZE 0 #endif #if SHRINK_DATA_SIZE #undef NO_CALLER #define NO_CALLER 1 #endif /* * Debug Related Config ******************************************************* */ #ifndef CONFIG_DEBUG #define CONFIG_DEBUG 1 #endif #ifndef CONFIG_DEBUG_RTL871X #define CONFIG_DEBUG_RTL871X 0 #endif #ifndef CONFIG_MEM_MONITOR #define CONFIG_MEM_MONITOR MEM_MONITOR_SIMPLE #endif #ifndef CONFIG_TRACE_SKB #define CONFIG_TRACE_SKB 0 #endif #ifndef WLAN_INTF_DBG #define WLAN_INTF_DBG 0 #endif // for Debug message #ifndef DBG #define DBG 0 #endif #ifndef CONFIG_IWPRIV_DBG #define CONFIG_IWPRIV_DBG 1 #endif #endif //WLANCONFIG_H