249 lines
8.2 KiB
C
249 lines
8.2 KiB
C
#ifndef _APP_CONFIG_H
|
|
#define _APP_CONFIG_H
|
|
|
|
// <<< Use Configuration Wizard in Context Menu >>>
|
|
|
|
/* ========================================================== */
|
|
/* ========= SYSTEM configuration ========= */
|
|
/* ========================================================== */
|
|
|
|
// <h> SYSTEM Configuration
|
|
|
|
// <o> SYSTEM_CLOCK_SEL
|
|
// <i> used to define system working clock
|
|
// <24000000=> 24MHz
|
|
// <48000000=> 48MHz
|
|
// <96000000=> 96MHz
|
|
// <144000000=> 144MHz
|
|
// <192000000=> 192MHz
|
|
// <240000000=> 240MHz
|
|
#define SYSTEM_CLOCK_SEL 24000000
|
|
|
|
// <o> DSP_ROM_CODE_XIP
|
|
// <i> check to choose DSP rom code running in iROM or XIP-Flash, default: iROM
|
|
// <0=> NO
|
|
// <1=> YES
|
|
#define DSP_ROM_CODE_XIP 0
|
|
|
|
#define DSP_CODE_LOAD_MODE_SDCARD 1
|
|
#define DSP_CODE_LOAD_MODE_XIP_RO 2
|
|
#define DSP_CODE_LOAD_MODE_FIX_ADDRESS 3
|
|
// <o> DSP_CODE_LOAD_MODE
|
|
// <i> choose dsp code load mode: 1. from sd card; 2. compiled into XIP bin file; 3. from fixed address in XIP flash
|
|
// <1=> DSP_CODE_LOAD_MODE_SDCARD
|
|
// <2=> DSP_CODE_LOAD_MODE_XIP_RO
|
|
// <3=> DSP_CODE_LOAD_MODE_FIX_ADDRESS
|
|
#define DSP_CODE_LOAD_MODE 2
|
|
|
|
// <o> DSP_CODE_FIX_ADDRESS
|
|
// <i> used to define where to fetch dsp code, this defination is valid when DSP_CODE_LOAD_MODE is DSP_CODE_LOAD_MODE_FIX_ADDRESS
|
|
#define DSP_CODE_FIX_ADDRESS 0x001C0000
|
|
|
|
#define CONTROLLER_CODE_LOAD_MODE_SDCARD 1
|
|
#define CONTROLLER_CODE_LOAD_MODE_XIP_RO 2
|
|
#define CONTROLLER_CODE_LOAD_MODE_FIX_ADDRESS 3
|
|
// <o> CONTROLLER_CODE_LOAD_MODE
|
|
// <i> choose dsp code load mode: 1. from sd card; 2. compiled into XIP bin file; 3. from fixed address in XIP flash
|
|
// <1=> CONTROLLER_CODE_LOAD_MODE_SDCARD
|
|
// <2=> CONTROLLER_CODE_LOAD_MODE_XIP_RO
|
|
// <3=> CONTROLLER_CODE_LOAD_MODE_FIX_ADDRESS
|
|
#define CONTROLLER_CODE_LOAD_MODE 2
|
|
|
|
// <o> CONTROLLER_CODE_INC_SENSOR_HUB
|
|
// <i> when CONTROLLER_CODE_LOAD_MODE is CONTROLLER_CODE_LOAD_MODE_XIP_RO, choose which firmware is commpiled into XIP bin file.
|
|
// <0=> NO
|
|
// <1=> YES
|
|
#define CONTROLLER_CODE_INC_SENSOR_HUB 0
|
|
|
|
// <o> CONTROLLER_CODE_FIX_ADDRESS
|
|
// <i> used to define where to fetch controller code, this defination is valid when CONTROLLER_CODE_LOAD_MODE is CONTROLLER_CODE_LOAD_MODE_FIX_ADDRESS
|
|
#define CONTROLLER_CODE_FIX_ADDRESS 0x001AC000
|
|
|
|
// </h>
|
|
|
|
/* ========================================================== */
|
|
/* ========= FreeRTOS configuration ========= */
|
|
/* ========================================================== */
|
|
|
|
// <h> FreeRTOS Configuration
|
|
|
|
// <o> ENABLE_RTOS_MONITOR
|
|
// <i> check to enable or disable RTOS monitor, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define ENABLE_RTOS_MONITOR 0
|
|
|
|
// <o> FREERTOS_MAX_PRIORITY
|
|
// <i> used to define priority of monitor task
|
|
// <1-10:1>
|
|
#define FREERTOS_MAX_PRIORITY 10
|
|
|
|
// <o> MONITOR_TASK_PRIORITY
|
|
// <i> used to define priority of monitor task, should not be larger than FREERTOS_MAX_PRIORITY
|
|
#define MONITOR_TASK_PRIORITY 1
|
|
#if MONITOR_TASK_PRIORITY > FREERTOS_MAX_PRIORITY
|
|
#error "MONITOR_TASK_PRIORITY should not be larger than FREERTOS_MAX_PRIORITY"
|
|
#endif
|
|
|
|
// <o> APP_TASK_PRIORITY
|
|
// <i> used to define priority of app task, should not be larger than FREERTOS_MAX_PRIORITY
|
|
#define APP_TASK_PRIORITY 3
|
|
#if APP_TASK_PRIORITY > FREERTOS_MAX_PRIORITY
|
|
#error "APP_TASK_PRIORITY should not be larger than FREERTOS_MAX_PRIORITY"
|
|
#endif
|
|
|
|
// <o> HOST_TASK_PRIORITY
|
|
// <i> used to define priority of host task, should not be larger than FREERTOS_MAX_PRIORITY
|
|
#define HOST_TASK_PRIORITY 2
|
|
#if HOST_TASK_PRIORITY > FREERTOS_MAX_PRIORITY
|
|
#error "HOST_TASK_PRIORITY should not be larger than FREERTOS_MAX_PRIORITY"
|
|
#endif
|
|
|
|
// <o> RPMSG_TASK_PRIORITY
|
|
// <i> used to define priority of rpmsg task, should not be larger than FREERTOS_MAX_PRIORITY
|
|
#define RPMSG_TASK_PRIORITY 6
|
|
#if RPMSG_TASK_PRIORITY > FREERTOS_MAX_PRIORITY
|
|
#error "RPMSG_TASK_PRIORITY should not be larger than FREERTOS_MAX_PRIORITY"
|
|
#endif
|
|
|
|
// <o> AUDIO_SCENE_TASK_PRIORITY
|
|
// <i> used to define priority of rpmsg task, should not be larger than FREERTOS_MAX_PRIORITY
|
|
#define AUDIO_SCENE_TASK_PRIORITY 6
|
|
#if AUDIO_SCENE_TASK_PRIORITY > FREERTOS_MAX_PRIORITY
|
|
#error "AUDIO_SCENE_TASK_PRIORITY should not be larger than FREERTOS_MAX_PRIORITY"
|
|
#endif
|
|
|
|
// <o> MONITOR_TASK_STACK_SIZE
|
|
// <i> used to define priority of monitor task
|
|
#define MONITOR_TASK_STACK_SIZE 128
|
|
|
|
// <o> APP_TASK_STACK_SIZE
|
|
// <i> used to define priority of APP task
|
|
#define APP_TASK_STACK_SIZE 1024 //256
|
|
|
|
// <o> HOST_TASK_STACK_SIZE
|
|
// <i> used to define priority of btdm-host task
|
|
#define HOST_TASK_STACK_SIZE 2048
|
|
|
|
// <o> RPMSG_TASK_STACK_SIZE
|
|
// <i> used to define priority of RPMSG task
|
|
#define RPMSG_TASK_STACK_SIZE 2048
|
|
|
|
// <o> AUDIO_SCENE_TASK_STACK_SIZE
|
|
// <i> used to define priority of audio scene task
|
|
#define AUDIO_SCENE_TASK_STACK_SIZE 1024
|
|
|
|
// </h>
|
|
|
|
/* ========================================================== */
|
|
/* ========= DSP configuration ========= */
|
|
/* ========================================================== */
|
|
|
|
// <h> DSP Configuration
|
|
|
|
// <o> ENABLE_DSP
|
|
// <i> check to enable or disable DSP, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define ENABLE_DSP 1
|
|
|
|
// </h>
|
|
|
|
/* ========================================================== */
|
|
/* ========= BTDM configuration ========= */
|
|
/* ========================================================== */
|
|
|
|
// <h> BTDM STACK Configuration
|
|
|
|
// <o> BTDM_STACK_ENABLE
|
|
// <i> check to enable or disable bluetooth, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE 1
|
|
|
|
// <o> BTDM_STACK_HCI_BAUDRATE
|
|
// <i> check to enable or disable bluetooth, default: DISABLE
|
|
// <1500000=> 1500000
|
|
// <921600=> 921600
|
|
// <460800=> 460800
|
|
// <115200=> 115200
|
|
#define BTDM_STACK_HCI_BAUDRATE 1500000
|
|
|
|
// <o> BTDM_STACK_ENABLE_BT
|
|
// <i> check to enable or disable classic bluetooth, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_BT 1
|
|
|
|
// <o> BTDM_STACK_ENABLE_HF
|
|
// <i> check to enable or disable hand free, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_HF 1
|
|
|
|
// <o> BTDM_STACK_ENABLE_AG
|
|
// <i> check to enable or disable audio-gate, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_AG 0
|
|
|
|
// <o> BTDM_STACK_ENABLE_A2DP_SRC
|
|
// <i> check to enable or disable a2dp srouce, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_A2DP_SRC 0
|
|
|
|
// <o> BTDM_STACK_ENABLE_A2DP_SNK
|
|
// <i> check to enable or disable a2dp sink, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_A2DP_SNK 1
|
|
|
|
// <o> BTDM_STACK_ENABLE_AVRCP
|
|
// <i> check to enable or disable avrcp, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_AVRCP 1
|
|
|
|
// <o> BTDM_STACK_ENABLE_AAC
|
|
// <i> check to enable or disable aac codec, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_AAC 0
|
|
|
|
// <o> BTDM_STACK_ENABLE_PBAP
|
|
// <i> check to enable or disable pbap, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_PBAP 1
|
|
|
|
// <o> BTDM_STACK_ENABLE_SPP
|
|
// <i> check to enable or disable spp, default: DISABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BTDM_STACK_ENABLE_SPP 0
|
|
// </h>
|
|
|
|
/* ========================================================== */
|
|
/* ========= BTDM Address configuration ========= */
|
|
/* ========================================================== */
|
|
|
|
// <h> BTDM Address configuration
|
|
|
|
// <o> BT_ADDR_RANDOM_ENABLE
|
|
// <i> check to enable or disable random bt addr, default: ENABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BT_ADDR_RANDOM_ENABLE 1
|
|
|
|
// <o> BLE_ADDR_RANDOM_ENABLE
|
|
// <i> check to enable or disable random ble static addr, default: ENABLE
|
|
// <0=> DISABLE
|
|
// <1=> ENABLE
|
|
#define BLE_ADDR_RANDOM_ENABLE 1
|
|
|
|
// </h>
|
|
// <<< end of configuration section >>>
|
|
|
|
#endif // _APP_CONFIG_H
|