800*320工程文件+初始demo提交
This commit is contained in:
231
SW/components/drivers/peripheral/Inc/driver_gpio.h
Normal file
231
SW/components/drivers/peripheral/Inc/driver_gpio.h
Normal file
@ -0,0 +1,231 @@
|
||||
/*
|
||||
******************************************************************************
|
||||
* @file driver_gpio.h
|
||||
* @author FreqChip Firmware Team
|
||||
* @version V1.0.0
|
||||
* @date 2021
|
||||
* @brief Header file of GPIO HAL module.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2021 FreqChip.
|
||||
* All rights reserved.
|
||||
******************************************************************************
|
||||
*/
|
||||
#ifndef __DRIVER_GPIO_H__
|
||||
#define __DRIVER_GPIO_H__
|
||||
|
||||
#include "fr30xx.h"
|
||||
|
||||
/** @addtogroup GPIO_Registers_Section
|
||||
* @{
|
||||
*/
|
||||
/* ################################ Register Section Start ################################ */
|
||||
|
||||
/* -----------------------------------------------*/
|
||||
/* GPIO Registers */
|
||||
/* -----------------------------------------------*/
|
||||
typedef struct
|
||||
{
|
||||
volatile uint32_t GPIO_OutputEN; /* Offset 0x00 */
|
||||
volatile uint32_t GPIO_IN_DATA; /* Offset 0x04 */
|
||||
volatile uint32_t GPIO_OUT_DATA; /* Offset 0x08 */
|
||||
volatile uint32_t GPIO_BIT_SET; /* Offset 0x0C */
|
||||
volatile uint32_t GPIO_BIT_CLEAR; /* Offset 0x10 */
|
||||
|
||||
volatile uint32_t EXTI_EN; /* Offset 0x14 */
|
||||
volatile uint32_t EXTI_INT_EN; /* Offset 0x18 */
|
||||
volatile uint32_t EXTI_INT_STATUS; /* Offset 0x1C */
|
||||
volatile uint32_t EXTI_TYPE; /* Offset 0x20 */
|
||||
volatile uint32_t EXTI_CNT[16]; /* Offset 0x24 */
|
||||
}struct_GPIO_t;
|
||||
|
||||
#define GPIO_TypeDef struct_GPIO_t
|
||||
|
||||
#define GPIOA (( GPIO_TypeDef *)GPIOA_BASE)
|
||||
#define GPIOB (( GPIO_TypeDef *)GPIOB_BASE)
|
||||
#define GPIOC (( GPIO_TypeDef *)GPIOC_BASE)
|
||||
#define GPIOD (( GPIO_TypeDef *)GPIOD_BASE)
|
||||
|
||||
|
||||
/* ################################ Register Section END ################################## */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup ADC_Initialization_Config_Section
|
||||
* @{
|
||||
*/
|
||||
/* ################################ Initialization<6F><6E>Config Section Start ################################ */
|
||||
|
||||
/** @defgroup GPIO_pins GPIO pins
|
||||
* @{
|
||||
*/
|
||||
#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */
|
||||
#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */
|
||||
#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */
|
||||
#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */
|
||||
#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */
|
||||
#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */
|
||||
#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */
|
||||
#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */
|
||||
#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */
|
||||
#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */
|
||||
#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */
|
||||
#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */
|
||||
#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */
|
||||
#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */
|
||||
#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */
|
||||
#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @defgroup EXTI_line_index
|
||||
* @{
|
||||
*/
|
||||
#define EXTI_LINE_0 ((uint16_t)0x0001) /* EXTI Line index 0 */
|
||||
#define EXTI_LINE_1 ((uint16_t)0x0002) /* EXTI Line index 1 */
|
||||
#define EXTI_LINE_2 ((uint16_t)0x0004) /* EXTI Line index 2 */
|
||||
#define EXTI_LINE_3 ((uint16_t)0x0008) /* EXTI Line index 3 */
|
||||
#define EXTI_LINE_4 ((uint16_t)0x0010) /* EXTI Line index 4 */
|
||||
#define EXTI_LINE_5 ((uint16_t)0x0020) /* EXTI Line index 5 */
|
||||
#define EXTI_LINE_6 ((uint16_t)0x0040) /* EXTI Line index 6 */
|
||||
#define EXTI_LINE_7 ((uint16_t)0x0080) /* EXTI Line index 7 */
|
||||
#define EXTI_LINE_8 ((uint16_t)0x0100) /* EXTI Line index 8 */
|
||||
#define EXTI_LINE_9 ((uint16_t)0x0200) /* EXTI Line index 9 */
|
||||
#define EXTI_LINE_10 ((uint16_t)0x0400) /* EXTI Line index 10 */
|
||||
#define EXTI_LINE_11 ((uint16_t)0x0800) /* EXTI Line index 11 */
|
||||
#define EXTI_LINE_12 ((uint16_t)0x1000) /* EXTI Line index 12 */
|
||||
#define EXTI_LINE_13 ((uint16_t)0x2000) /* EXTI Line index 13 */
|
||||
#define EXTI_LINE_14 ((uint16_t)0x4000) /* EXTI Line index 14 */
|
||||
#define EXTI_LINE_15 ((uint16_t)0x8000) /* EXTI Line index 15 */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/* GPIO mode */
|
||||
typedef enum
|
||||
{
|
||||
GPIO_MODE_INPUT = 0x1000u, /*!< Input Floating Mode */
|
||||
GPIO_MODE_INPUT_HRS = 0x1001u, /*!< Input High Resistance Mode */
|
||||
GPIO_MODE_OUTPUT_PP = 0x1002u, /*!< Output Push Pull Mode */
|
||||
GPIO_MODE_AF_PP = 0x0002u, /*!< Alternate Function Push Pull Mode */
|
||||
GPIO_MODE_EXTI_IT_LOW_LEVEL = 0x1100u, /*!< External Interrupt Mode with low level trigger detection */
|
||||
GPIO_MODE_EXTI_IT_HIGH_LEVEL = 0x1101u, /*!< External Interrupt Mode with high level trigger detection */
|
||||
GPIO_MODE_EXTI_IT_FALLING = 0x1102u, /*!< External Interrupt Mode with Falling edge trigger detection */
|
||||
GPIO_MODE_EXTI_IT_RISING = 0x1103u, /*!< External Interrupt Mode with Rising edge trigger detection */
|
||||
|
||||
GPIO_MODE_IO_MASK = 0x1000, /*!< GPIO Function Mask */
|
||||
GPIO_MODE_IT_MASK = 0x0100, /*!< EXTI Function Mask */
|
||||
}enum_GPIO_MODE_t;
|
||||
|
||||
/* GPIO pull */
|
||||
typedef enum
|
||||
{
|
||||
GPIO_NOPULL, /*!< No Pull-up or Pull-down activation */
|
||||
GPIO_PULLUP, /*!< Pull-up activation */
|
||||
GPIO_PULLDOWN, /*!< Pull-down activation */
|
||||
}enum_Pull_t;
|
||||
|
||||
/* function selection */
|
||||
typedef enum
|
||||
{
|
||||
GPIO_FUNCTION_0,
|
||||
GPIO_FUNCTION_1,
|
||||
GPIO_FUNCTION_2,
|
||||
GPIO_FUNCTION_3,
|
||||
GPIO_FUNCTION_4,
|
||||
GPIO_FUNCTION_5,
|
||||
GPIO_FUNCTION_6,
|
||||
GPIO_FUNCTION_7,
|
||||
GPIO_FUNCTION_8,
|
||||
GPIO_FUNCTION_9,
|
||||
GPIO_FUNCTION_A,
|
||||
GPIO_FUNCTION_B,
|
||||
GPIO_FUNCTION_C,
|
||||
GPIO_FUNCTION_D,
|
||||
GPIO_FUNCTION_E,
|
||||
GPIO_FUNCTION_F,
|
||||
}enum_Function_t;
|
||||
|
||||
/* GPIO Bit SET and Bit RESET enumeration */
|
||||
typedef enum
|
||||
{
|
||||
GPIO_PIN_CLEAR = 0u,
|
||||
GPIO_PIN_SET = 1u,
|
||||
}enum_PinStatus_t;
|
||||
|
||||
/* GPIO Drive Current Index */
|
||||
typedef enum
|
||||
{
|
||||
GPIO_DRIVE_1mA,
|
||||
GPIO_DRIVE_2mA,
|
||||
GPIO_DRIVE_3mA,
|
||||
GPIO_DRIVE_4mA,
|
||||
}enum_GPIO_Drive_Current_t;
|
||||
|
||||
/*
|
||||
* @brief GPIO Init structure definition
|
||||
*/
|
||||
typedef struct
|
||||
{
|
||||
uint32_t Pin; /*!< Specifies the GPIO pins to be configured.
|
||||
This parameter can be any value of @ref GPIO_pins */
|
||||
|
||||
uint32_t Mode; /*!< Specifies the operating mode for the selected pins.
|
||||
This parameter can be a value of @ref enum_GPIO_MODE_t */
|
||||
|
||||
uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins.
|
||||
This parameter can be a value of @ref enum_Pull_t */
|
||||
|
||||
uint32_t Alternate; /*!< Peripheral to be connected to the selected pins.
|
||||
This parameter can be a value of @ref enum_Function_t */
|
||||
}GPIO_InitTypeDef;
|
||||
|
||||
/* ################################ Initialization<6F><6E>Config Section END ################################## */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/* Exported functions --------------------------------------------------------*/
|
||||
|
||||
/* gpio_init */
|
||||
void gpio_init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init);
|
||||
|
||||
/* gpio_set_portpull */
|
||||
void gpio_set_portpull(GPIO_TypeDef *GPIOx, uint16_t fu16_Pin, enum_Pull_t fe_Pull);
|
||||
|
||||
/* gpio_write_group */
|
||||
/* gpio_write_pin */
|
||||
void gpio_write_group(GPIO_TypeDef *GPIOx, uint16_t fu16_GroupStatus);
|
||||
void gpio_write_pin(GPIO_TypeDef *GPIOx, uint16_t fu16_Pin, enum_PinStatus_t fe_PinStatus);
|
||||
|
||||
/* gpio_read_group */
|
||||
/* gpio_read_pin */
|
||||
uint16_t gpio_read_group(GPIO_TypeDef *GPIOx);
|
||||
enum_PinStatus_t gpio_read_pin(GPIO_TypeDef *GPIOx, uint16_t fu16_Pin);
|
||||
|
||||
/* gpio_drive_current_config */
|
||||
/* input schmitt enable/disable */
|
||||
void gpio_drive_current_config(GPIO_TypeDef *GPIOx, uint16_t fu16_Pin, enum_GPIO_Drive_Current_t fe_GPIO_Drive);
|
||||
|
||||
/* exti_interrupt_enable */
|
||||
/* exti_interrupt_disable */
|
||||
void exti_interrupt_enable(GPIO_TypeDef *GPIOx, uint16_t fu16_EXTI_Line);
|
||||
void exti_interrupt_disable(GPIO_TypeDef *GPIOx, uint16_t fu16_EXTI_Line);
|
||||
|
||||
/* exti_get_LineStatus */
|
||||
/* exti_clear_LineStatus */
|
||||
bool exti_get_LineStatus(GPIO_TypeDef *GPIOx, uint16_t fu16_EXTI_Line);
|
||||
void exti_clear_LineStatus(GPIO_TypeDef *GPIOx, uint16_t fu16_EXTI_Line);
|
||||
|
||||
/* exti_set_FilterCNT */
|
||||
void exti_set_Filter(GPIO_TypeDef *GPIOx, uint16_t fu16_EXTI_Line, uint8_t fu8_DIV, uint16_t fu16_CNT);
|
||||
|
||||
#endif
|
||||
|
||||
|
||||
|
||||
Reference in New Issue
Block a user