#include "awtk.h"
#include "gpio_protocol.h"
#include "board.h"
#include "chip.h"


void right_led_on(void){
    gpio_direction_output(GPIO_LIGHT_R_LED, TRUE);
}

void right_led_off(void){
    gpio_direction_output(GPIO_LIGHT_R_LED, FALSE);
}

void left_led_on(void){
    gpio_direction_output(GPIO_LIGHT_L_LED, TRUE);
}

void left_led_off(void){
    gpio_direction_output(GPIO_LIGHT_L_LED, FALSE);
}

void yg_led_on(void){
    gpio_direction_output(GPIO_LIGHT_YG_LED, TRUE);
}

void yg_led_off(void){
    gpio_direction_output(GPIO_LIGHT_YG_LED, FALSE);
}

void abs_led_on(void){
    gpio_direction_output(GPIO_LIGHT_ABS, TRUE);
}

void abs_led_off(void){
    gpio_direction_output(GPIO_LIGHT_ABS, FALSE);
}

void oil_led_on(void){
    gpio_direction_output(GPIO_LIGHT_OIL, TRUE);
}

void oil_led_off(void){
    gpio_direction_output(GPIO_LIGHT_OIL, FALSE);
}

void n_led_on(void){
    gpio_direction_output(GPIO_LIGHT_N_LED, TRUE);
}

void n_led_off(void){
    gpio_direction_output(GPIO_LIGHT_N_LED, FALSE);
}

void eng_led_on(void){
    gpio_direction_output(GPIO_LIGHT_ENG_LED, TRUE);
}

void eng_led_off(void){
    gpio_direction_output(GPIO_LIGHT_ENG_LED, FALSE);
}

void vbat_led_on(void){
    gpio_direction_output(GPIO_LIGHT_VBAT_LED, TRUE);
}

void vbat_led_off(void){
    gpio_direction_output(GPIO_LIGHT_VBAT_LED, FALSE);
}


void light_gpio_init(void){
        //灯光使能
	gpio_direction_output(47, TRUE);
	//R_LED
	gpio_direction_output(GPIO_LIGHT_R_LED, TRUE);
	//YG_LED
	gpio_direction_output(GPIO_LIGHT_YG_LED, TRUE);
	//OIL_LED
	gpio_direction_output(GPIO_LIGHT_OIL, TRUE);
	//L_LED
	gpio_direction_output(GPIO_LIGHT_L_LED, TRUE);
	//N_LED
	gpio_direction_output(GPIO_LIGHT_N_LED, TRUE);
    // #if (MOTO_WARE_HOSE == MOTO_ICMX_A580A)
    // //ABS_LED
	// gpio_direction_output(GPIO_LIGHT_ABS, TRUE);
	// //ENG_LED
	// gpio_direction_output(GPIO_LIGHT_ENG_LED, TRUE);
    // #endif
	//VBAT_LED
	gpio_direction_output(GPIO_LIGHT_VBAT_LED, TRUE);

    gpio_direction_input(GPIO_LIGHT_SET);
    gpio_direction_input(GPIO_LIGHT_MODE);

    gpio_timer();//按键 //左右灯光

}

void light_off(void){
	//R_LED
	gpio_direction_output(GPIO_LIGHT_R_LED, FALSE);
	//YG_LED
	gpio_direction_output(GPIO_LIGHT_YG_LED, FALSE);
	//OIL_LED
	gpio_direction_output(GPIO_LIGHT_OIL, FALSE);
	//L_LED
	gpio_direction_output(GPIO_LIGHT_L_LED, FALSE);
	//N_LED
	gpio_direction_output(GPIO_LIGHT_N_LED, FALSE);
	// #if (MOTO_WARE_HOSE == MOTO_ICMX_A580A)
    // //ABS_LED
	// gpio_direction_output(GPIO_LIGHT_ABS, FALSE);
    // //ENG_LED
	// gpio_direction_output(GPIO_LIGHT_ENG_LED, FALSE);
    // #endif
	//VBAT_LED
	gpio_direction_output(GPIO_LIGHT_VBAT_LED, FALSE);

}


void right_led_switch(uint8_t type){
    switch(type){
        case 0:right_led_off();break;
        case 1:right_led_on();break;
        default:break;
    }
}

void left_led_switch(uint8_t type){
    switch(type){
        case 0:left_led_off();break;
        case 1:left_led_on();break;
        default:break;
    }
}

void yg_led_switch(uint8_t type){
    switch(type){
        case 0:yg_led_off();break;
        case 1:
            yg_led_on();
            break;
        default:break;
    }
}

void abs_led_switch(uint8_t type){
    switch(type){
        case 0:abs_led_off();break;
        case 1:abs_led_on();break;
        default:break;
    }
}

void oil_led_switch(uint8_t type){
    switch(type){
        case 0:oil_led_off();break;
        case 1:oil_led_on();break;
        default:break;
    }
}

void n_led_switch(uint8_t type){
    switch(type){
        case 0:n_led_off();break;
        case 1:n_led_on();break;
        default:break;
    }
}

void vbat_led_switch(uint8_t type){
    switch(type){
        case 0:vbat_led_off();break;
        case 1:vbat_led_on();break;
        default:break;
    }
}

void eng_led_switch(uint8_t type){
    switch(type){
        case 0:eng_led_off();break;
        case 1:eng_led_on();break;
        default:break;
    }
}