LiJie
/
MAX_CARLINK_A270S
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
MAX_CARLINK_A270S/MXC_A27-PCB4.5-270S/lib/wlan/rtl8821cs/include/autoconf.h

1083 lines
27 KiB
C
Raw Permalink Normal View History

CARPLAY版本整理
2025-01-21 16:49:37 +08:00
/******************************************************************************
* Copyright (c) 2013-2016 Realtek Semiconductor Corp.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
******************************************************************************/
#ifndef WLANCONFIG_H
#define WLANCONFIG_H
/*
* Include user defined options first. Anything not defined in these files
* will be set to standard values. Override anything you dont like!
*/
#include "rtwlan_config.h"
/*
* Public General Config ******************************************************
*/
#ifndef DRV_NAME
#define DRV_NAME "undefine"
#endif
#ifndef DRIVERVERSION
#define DRIVERVERSION "undefine"
#endif
#ifndef CONFIG_PLATFOMR_CUSTOMER_RTOS
#define PLATFORM_FREERTOS
#else
#define PLATFORM_CUSTOMER_RTOS
#define CONFIG_LWIP_LAYER 0
#endif
#ifndef CONFIG_LWIP_LAYER
#define CONFIG_LWIP_LAYER 1
#endif
#ifndef CONFIG_LITTLE_ENDIAN
#define CONFIG_LITTLE_ENDIAN 1 // 0 for CONFIG_BIG_ENDIAN
#endif
/*
* Performance and Size Related Config ****************************************
*/
//CONFIG_THROUGHPUT_LEVEL must set according to customer plaftorm or device, not means that the value of CONFIG_THROUGHPUT_LEVEL is bigger, the throughput is higher.
//CONFIG_THROUGHPUT_LEVEL == 1 MAX_TX_SKB_DATA_NUM=7 MAX_RX_SKB_DATA_NUM=1
//CONFIG_THROUGHPUT_LEVEL == 2 MAX_TX_SKB_DATA_NUM=15 MAX_RX_SKB_DATA_NUM=1 if no log "Wait for tx skbdata", no need to use CONFIG_THROUGHPUT_LEVEL 2
//CONFIG_THROUGHPUT_LEVEL == 3 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 if no log "Wait for tx skbdata", no need to use CONFIG_THROUGHPUT_LEVEL 3
//CONFIG_THROUGHPUT_LEVEL == 4 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 CONFIG_TX_BUS_AGG_NUM=3 CONFIG_RX_BUS_AGG_NUM=5 RX_AGGREGATION=1
//CONFIG_THROUGHPUT_LEVEL == 5 MAX_TX_SKB_DATA_NUM=30 MAX_RX_SKB_DATA_NUM=1 CONFIG_TX_BUS_AGG_NUM=5 CONFIG_RX_BUS_AGG_NUM=8 RX_AGGREGATION=1
#if !defined(CONFIG_THROUGHPUT_LEVEL) || (CONFIG_THROUGHPUT_LEVEL == 0)
#undef CONFIG_THROUGHPUT_LEVEL
#define CONFIG_THROUGHPUT_LEVEL 1 //1 2 3 4 5
#endif
#if !defined(CONFIG_TX_BUS_AGG_NUM) || (CONFIG_TX_BUS_AGG_NUM == 0)
#if (CONFIG_THROUGHPUT_LEVEL == 4)
#define CONFIG_TX_BUS_AGG_NUM 3
#elif (CONFIG_THROUGHPUT_LEVEL == 5)
#define CONFIG_TX_BUS_AGG_NUM 5
#else
#define CONFIG_TX_BUS_AGG_NUM 1 //1 3 5 8
#endif
#endif
//CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA is used to decrease the TX buf size if CONFIG_TX_BUS_AGG_NUM>1, will decrease tx throughput, default disable.
#if !defined(CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA)
#define CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA 0
#endif
#if (CONFIG_TX_BUS_AGG_NUM == 1) && CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA
#error "no need to enable CONFIG_USE_INDEPENDENT_TX_BUS_AGG_DATA"
#endif
//CONFIG_USE_EXT_RX_REORDER_SKB_DATA is used to decrease the RX buf size if enable CONFIG_RECV_REORDERING_CTRL, will decrease RX throughput, default disable.
#if !defined(CONFIG_USE_EXT_RX_REORDER_SKB_DATA)
#define CONFIG_USE_EXT_RX_REORDER_SKB_DATA 0
#endif
#if !defined(CONFIG_RX_BUS_AGG_NUM) || (CONFIG_RX_BUS_AGG_NUM == 0)
#if (CONFIG_THROUGHPUT_LEVEL == 4)
#define CONFIG_RX_BUS_AGG_NUM 5
#elif (CONFIG_THROUGHPUT_LEVEL == 5)
#define CONFIG_RX_BUS_AGG_NUM 8
#else
#define CONFIG_RX_BUS_AGG_NUM 1 //1 3 5 8
#endif
#endif
#if (!defined(RX_AGGREGATION) || !RX_AGGREGATION) && (CONFIG_RX_BUS_AGG_NUM > 1)
#define RX_AGGREGATION 1
#endif
#if !RX_AGGREGATION && CONFIG_RECV_REORDERING_CTRL
#error "no need to enable CONFIG_RECV_REORDERING_CTRL"
#endif
#ifndef USE_XMIT_EXTBUFF
#define USE_XMIT_EXTBUFF 0
#endif
#ifndef CONFIG_RX_SHORTCUT
#define CONFIG_RX_SHORTCUT 0
#endif
// remove function to reduce code
#if !defined(CONFIG_HARDWARE_8821C) && !defined(CONFIG_HARDWARE_8723F)
#define NOT_SUPPORT_5G 1
#else
#define NOT_SUPPORT_5G 0
#endif
#define SUPPORT_5G_CHANNEL (NOT_SUPPORT_5G ? 0 : 1)
#if !defined(CONFIG_HARDWARE_8192E) && !defined(CONFIG_HARDWARE_8192F)
#define NOT_SUPPORT_RF_MULTIPATH 1
#else
#define NOT_SUPPORT_RF_MULTIPATH 0
#endif
#ifndef NOT_SUPPORT_VHT
#define NOT_SUPPORT_VHT 1
#endif
#ifndef NOT_SUPPORT_80M
#define NOT_SUPPORT_80M 1
#endif
#ifndef NOT_SUPPORT_40M
#define NOT_SUPPORT_40M 1
#endif
#ifndef NOT_SUPPORT_OLD_CHANNEL_PLAN
#define NOT_SUPPORT_OLD_CHANNEL_PLAN 1
#endif
#ifndef NOT_SUPPORT_BT
#define NOT_SUPPORT_BT 1
#endif
/*
* Hareware/Firmware Related Config *******************************************
*/
#ifndef CONFIG_FW_C2H_PKT
#define CONFIG_FW_C2H_PKT 1
#endif
#ifndef PHYDM_LINUX_CODING_STYLE
#define PHYDM_LINUX_CODING_STYLE 1
#endif
#ifndef PHYDM_NEW_INTERFACE
#define PHYDM_NEW_INTERFACE (PHYDM_LINUX_CODING_STYLE ? 1 : 0)
#endif
#ifndef RTW_NOTCH_FILTER
#define RTW_NOTCH_FILTER 0
#endif
#ifndef CONFIG_EMBEDDED_FWIMG
#define CONFIG_EMBEDDED_FWIMG 1
#endif
#ifndef CONFIG_PHY_SETTING_WITH_ODM
#define CONFIG_PHY_SETTING_WITH_ODM 1
#endif
#ifndef HAL_MAC_ENABLE
#define HAL_MAC_ENABLE 1
#endif
#ifndef HAL_BB_ENABLE
#define HAL_BB_ENABLE 1
#endif
#ifndef HAL_RF_ENABLE
#define HAL_RF_ENABLE 1
#endif
#ifndef CONFIG_FAKE_EFUSE
#define CONFIG_FAKE_EFUSE 0
#endif
#ifndef CONFIG_RF_POWER_TRIM
#define CONFIG_RF_POWER_TRIM 0
#endif
#define RTL8192E_SUPPORT 0
#define RTL8812A_SUPPORT 0
#define RTL8821A_SUPPORT 0
#define RTL8723B_SUPPORT 0
#define RTL8188E_SUPPORT 0
#define RTL8188F_SUPPORT 0
#define RTL8821C_SUPPORT 0
#define RTL8723D_SUPPORT 0
#define RTL8192F_SUPPORT 0
#define RTL8723F_SUPPORT 0
/* For DM support */
#ifndef RATE_ADAPTIVE_SUPPORT
#define RATE_ADAPTIVE_SUPPORT 0
#endif
#ifndef CONFIG_ODM_REFRESH_RAMASK
#define CONFIG_ODM_REFRESH_RAMASK 0
#endif
#if defined(CONFIG_HARDWARE_8188F)
#define CONFIG_RTL8188F
#undef RTL8188F_SUPPORT
#define RTL8188F_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8192E)
#define CONFIG_RTL8192E
#undef RTL8192E_SUPPORT
#define RTL8192E_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8821C)
#define CONFIG_RTL8821C
#undef RTL8821C_SUPPORT
#define RTL8821C_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8723F)
#define CONFIG_RTL8723F
#undef RTL8723F_SUPPORT
#define RTL8723F_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8723D)
#define CONFIG_RTL8723D
#undef RTL8723D_SUPPORT
#define RTL8723D_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8723B)
#define CONFIG_RTL8723B
#undef RTL8723B_SUPPORT
#define RTL8723B_SUPPORT 1
#elif defined(CONFIG_HARDWARE_8703B)
#define CONFIG_RTL8703B
#undef RTL8703B_SUPPORT
#define RTL8703B_SUPPORT 1
#define CONFIG_BT_COEXIST 1
#elif defined(CONFIG_HARDWARE_8192F)
#define CONFIG_RTL8192F
#undef RTL8192F_SUPPORT
#define RTL8192F_SUPPORT 1
#else
#define CONFIG_RTL8188E
#undef RTL8188E_SUPPORT
#define RTL8188E_SUPPORT 1
#undef RATE_ADAPTIVE_SUPPORT
#define RATE_ADAPTIVE_SUPPORT 1
#endif
#if defined(CONFIG_RTL8723F) || defined(CONFIG_RTL8821C)
#ifndef LOAD_FW_HEADER_FROM_DRIVER
#define LOAD_FW_HEADER_FROM_DRIVER 1
#endif
#ifndef CONFIG_NO_FW
#define CONFIG_NO_FW 0
#endif
#ifndef RTW_HALMAC
#define RTW_HALMAC 1
#endif
#ifndef RTW_HALMAC_SIZE_OPTIMIZATION
#define RTW_HALMAC_SIZE_OPTIMIZATION 1
#endif
#if CONFIG_CONCURRENT_MODE
#define CONFIG_AP_PORT_SWAP 1
#endif
#else
#if RTW_HALMAC || LOAD_FW_HEADER_FROM_DRIVER || RTW_HALMAC_SIZE_OPTIMIZATION || SUPPORT_5G_CHANNEL
#error "CONFIG_HARDWARE_8821C has not been defined, define CONFIG_HARDWARE_8821C firstly"
#endif
#endif
#ifdef CONFIG_HARDWARE_8723F
//#define CONFIG_TCP_CSUM_OFFLOAD_RX
//#define CONFIG_RTS_FULL_BW
//#if !CONFIG_TXPWR_LIMIT && CONFIG_TXPWR_LIMIT_EN
// #undef CONFIG_TXPWR_LIMIT
// #define CONFIG_TXPWR_LIMIT 1
//#endif
/*
#ifdef CONFIG_NO_FW
#ifdef CONFIG_RTW_MAC_HIDDEN_RPT
#undef CONFIG_RTW_MAC_HIDDEN_RPT
#endif
#else
#ifndef CONFIG_RTW_MAC_HIDDEN_RPT
#define CONFIG_RTW_MAC_HIDDEN_RPT
#endif
#endif
*/
//#define CONFIG_WRITE_BCN_LEN_TO_FW
#if CONFIG_WOWLAN
#define CONFIG_WOW_PATTERN_IN_TXFIFO 1
#endif
#ifndef DISABLE_BB_RF
#define DISABLE_BB_RF 0
#endif
#ifndef CONFIG_HALMAC_CODESIZE
#define CONFIG_HALMAC_CODESIZE 0
#endif
#ifndef CONFIG_TXPWR_PG_WITH_TSSI_OFFSET
#define CONFIG_TXPWR_PG_WITH_TSSI_OFFSET
#endif
#endif
#ifdef CONFIG_HARDWARE_8821C
#ifndef FW_IQK
#define FW_IQK 1
#endif
#ifndef CONFIG_80211AC_VHT
#define CONFIG_80211AC_VHT 0
#endif
#if CONFIG_80211AC_VHT
#ifndef CONFIG_PHY_CAPABILITY_QUERY
#define CONFIG_PHY_CAPABILITY_QUERY 1
#endif
#if NOT_SUPPORT_VHT
#define NOT_SUPPORT_VHT 0
#endif
#if !CONFIG_80211N_HT
#define CONFIG_80211N_HT 1
#endif
#if NOT_SUPPORT_40M
#define NOT_SUPPORT_40M 0
#endif
#if NOT_SUPPORT_80M
#define NOT_SUPPORT_80M 0
#endif
#endif
#ifndef CONFIG_IO_CHECK_IN_ANA_LOW_CLK
#define CONFIG_IO_CHECK_IN_ANA_LOW_CLK 1
#endif
#endif
/*
* Wi-Fi Functions Config *****************************************************
*/
#ifndef CONFIG_PLATFOMR_CUSTOMER_RTOS // local default: support WPA3
#ifndef CONFIG_PMKSA_CACHING
#define CONFIG_PMKSA_CACHING 1
#endif
#ifndef CONFIG_IEEE80211W
#define CONFIG_IEEE80211W 1
#endif
#ifndef CONFIG_SAE_SUPPORT
#define CONFIG_SAE_SUPPORT 1
#endif
#else
#ifndef CONFIG_PMKSA_CACHING
#define CONFIG_PMKSA_CACHING 0
#endif
#ifndef CONFIG_IEEE80211W
#define CONFIG_IEEE80211W 0
#endif
#ifndef CONFIG_SAE_SUPPORT
#define CONFIG_SAE_SUPPORT 0
#endif
#endif // end CONFIG_PLATFOMR_CUSTOMER_RTOS
#if CONFIG_SAE_SUPPORT
#define CONFIG_SAE_DH_SUPPORT 1
//#define ALL_DH_GROUPS
#endif
#ifndef CONFIG_80211N_HT
#define CONFIG_80211N_HT 1
#endif
/* for 802.11-K,V,R */
#ifndef CONFIG_IEEE80211K
#define CONFIG_IEEE80211K 0
#endif
#ifndef CONFIG_LAYER2_ROAMING
#define CONFIG_LAYER2_ROAMING 0
#if (CONFIG_RTW_WNM || CONFIG_IEEE80211R)
#error "CONFIG_LAYER2_ROAMING has not been defined, define CONFIG_LAYER2_ROAMING firstly"
#endif
#endif
#ifndef CONFIG_RTW_WNM
#define CONFIG_RTW_WNM 0
#endif
#ifndef CONFIG_IEEE80211R
#define CONFIG_IEEE80211R 0
#endif
#ifndef CONFIG_RECV_REORDERING_CTRL
#define CONFIG_RECV_REORDERING_CTRL 0
#endif
#if !CONFIG_RECV_REORDERING_CTRL && CONFIG_USE_EXT_RX_REORDER_SKB_DATA
#error "no need to enable CONFIG_USE_EXT_RX_REORDER_SKB_DATA"
#endif
#if CONFIG_RECV_REORDERING_CTRL && CONFIG_RX_SHORTCUT
#error "CONFIG_RECV_REORDERING_CTRL and CONFIG_RX_SHORTCUT can't be enabled together!"
#endif
#if CONFIG_RECV_REORDERING_CTRL && !defined(REORDER_WSIZE)
#define REORDER_WSIZE 32
#endif
#if CONFIG_RECV_REORDERING_CTRL && !defined(REORDER_WAIT_TIME)
#define REORDER_WAIT_TIME (30) // (ms)
#endif
/* For PS */
#ifndef CONFIG_POWER_SAVING
#define CONFIG_POWER_SAVING 0
#endif
#if CONFIG_POWER_SAVING
#ifndef CONFIG_IPS
#define CONFIG_IPS 1
#endif
#if CONFIG_IPS
#define CONFIG_IPS_LEVEL_2 0//0:normal ips; 1: keepfwalive
#endif
#ifndef CONFIG_LPS
#define CONFIG_LPS 1
#endif
#if CONFIG_LPS && !defined(CONFIG_LPS_CHK_BY_TP)
#define CONFIG_LPS_CHK_BY_TP 1
#endif
#ifndef CONFIG_LPS_LCLK
#define CONFIG_LPS_LCLK 0
#endif
#if CONFIG_LPS_LCLK && !defined(CONFIG_DETECT_CPWM_BY_POLLING)
#define CONFIG_DETECT_CPWM_BY_POLLING 1
#endif
#if CONFIG_LPS_LCLK && !defined(LPS_RPWM_WAIT_MS)
#define LPS_RPWM_WAIT_MS 300
#endif
#ifndef CONFIG_WAIT_PS_ACK
#define CONFIG_WAIT_PS_ACK 1
#endif
#ifndef CONFIG_FW_PSTIMEOUT
#define CONFIG_FW_PSTIMEOUT 1
#endif
#else
#if CONFIG_IPS || CONFIG_LPS
#error "CONFIG_POWER_SAVING has not been defined, define CONFIG_POWER_SAVING firstly"
#endif
#endif
#if !CONFIG_LPS && CONFIG_LPS_LCLK
#error "CONFIG_LPS has not been defined, define CONFIG_LPS firstly"
#endif
#if !CONFIG_LPS_LCLK && CONFIG_DETECT_CPWM_BY_POLLING
#error "CONFIG_LPS_LCLK has not been defined, define CONFIG_LPS_LCLK firstly"
#endif
#ifndef CONFIG_AUTO_RECONNECT
#define CONFIG_AUTO_RECONNECT 1
#endif
/* For WPA2 */
#ifndef CONFIG_INCLUDE_WPA_PSK
#define CONFIG_INCLUDE_WPA_PSK 1
#endif
#if CONFIG_INCLUDE_WPA_PSK
#ifndef CONFIG_MULTIPLE_WPA_STA
#define CONFIG_MULTIPLE_WPA_STA 1
#endif
#ifndef CONFIG_WPA2_PREAUTH
#define CONFIG_WPA2_PREAUTH 0
#endif
#ifndef PSK_SUPPORT_TKIP
#define PSK_SUPPORT_TKIP 1
#endif
#ifndef CONFIG_PTK_REKEY
#define CONFIG_PTK_REKEY 0
#endif
#if CONFIG_PTK_REKEY
#define CONFIG_XMIT_ACK
#endif
#else
#if CONFIG_MULTIPLE_WPA_STA || PSK_SUPPORT_TKIP || CONFIG_PTK_REKEY
#error "CONFIG_INCLUDE_WPA_PSK has not been defined, define CONFIG_INCLUDE_WPA_PSK firstly"
#endif
#endif
/* For promiscuous mode */
#ifndef CONFIG_PROMISC
#define CONFIG_PROMISC 0
#endif
#ifndef PROMISC_DENY_PAIRWISE
#define PROMISC_DENY_PAIRWISE 0
#endif
/* For Simple Link */
#ifndef CONFIG_INCLUDE_SIMPLE_CONFIG
#define CONFIG_INCLUDE_SIMPLE_CONFIG 0
#endif
// for probe request with custom vendor specific IE
#ifndef CONFIG_CUSTOM_IE
#define CONFIG_CUSTOM_IE 1
#endif
/* For multicast */
#ifndef CONFIG_MULTICAST
#define CONFIG_MULTICAST 0
#endif
/* For STA+AP Concurrent MODE */
#ifndef CONFIG_CONCURRENT_MODE
#define CONFIG_CONCURRENT_MODE 0
#endif
#if CONFIG_CONCURRENT_MODE
#ifndef CONFIG_MCC_MODE
#define CONFIG_MCC_MODE 0
#endif
#ifndef CONFIG_RUNTIME_PORT_SWITCH
#if defined(CONFIG_HARDWARE_8723D) || defined(CONFIG_HARDWARE_8188F)
#define CONFIG_RUNTIME_PORT_SWITCH 1
#else
#define CONFIG_RUNTIME_PORT_SWITCH 0
#endif
#endif
#else
#if CONFIG_RUNTIME_PORT_SWITCH || CONFIG_MCC_MODE
#error "CONFIG_CONCURRENT_MODE has not been defined, define CONFIG_CONCURRENT_MODE firstly"
#endif
#endif
#ifndef NET_IF_NUM
#define NET_IF_NUM (CONFIG_CONCURRENT_MODE ? 2 : 1)
#endif
/******** For EAP auth configurations *********/
#ifndef PRE_CONFIG_EAP
#define PRE_CONFIG_EAP 0
#endif
// DO NOT change the below config of EAP
#ifndef CONFIG_TLS
#define CONFIG_TLS (PRE_CONFIG_EAP ? 1 : 0)
#endif
#ifndef CONFIG_PEAP
#define CONFIG_PEAP (PRE_CONFIG_EAP ? 1 : 0)
#endif
#ifndef CONFIG_TTLS
#define CONFIG_TTLS (PRE_CONFIG_EAP ? 1 : 0)
#endif
// enable 1X code in lib_wlan as default (increase 380 bytes)
#ifndef CONFIG_EAP
#define CONFIG_EAP 0
#endif
#ifndef EAP_REMOVE_UNUSED_CODE
#define EAP_REMOVE_UNUSED_CODE ((CONFIG_TLS || CONFIG_PEAP || CONFIG_TTLS) ? 1 : 0)
#endif
#ifndef EAP_SSL_VERIFY_SERVER
#define EAP_SSL_VERIFY_SERVER 1
#endif
#if CONFIG_TLS && !defined(EAP_SSL_VERIFY_CLIENT)
#define EAP_SSL_VERIFY_CLIENT 1
#endif
#if CONFIG_TTLS
#ifndef EAP_MSCHAPv2
#define EAP_MSCHAPv2 1
#endif
#ifndef EAP_TTLS_MSCHAPv2
#define EAP_TTLS_MSCHAPv2 1
#endif
#ifndef EAP_TTLS_EAP
#define EAP_TTLS_EAP 0
#endif
#ifndef EAP_TTLS_MSCHAP
#define EAP_TTLS_MSCHAP 0
#endif
#ifndef EAP_TTLS_PAP
#define EAP_TTLS_PAP 0
#endif
#ifndef EAP_TTLS_CHAP
#define EAP_TTLS_CHAP 0
#endif
#else
#if EAP_MSCHAPv2 || EAP_TTLS_MSCHAPv2
#error "CONFIG_TTLS has not been defined, define CONFIG_TTLS firstly"
#endif
#endif
/******** End of EAP configurations *********/
#ifndef SUPPORT_SCAN_BUF
#define SUPPORT_SCAN_BUF 1
#endif
/* For WPS and P2P */
#ifndef CONFIG_WPS
#define CONFIG_WPS 0
#endif
#if CONFIG_WPS
#define CONFIG_ENABLE_WPS 1
#endif
#if CONFIG_ENABLE_WPS
#define WPS_CONNECT_RETRY_COUNT 4
#define WPS_CONNECT_RETRY_INTERVAL 5000 // in ms
#endif
#ifndef CONFIG_WPS_AP
#define CONFIG_WPS_AP 0
#endif
#ifndef CONFIG_P2P_NEW
#define CONFIG_P2P_NEW 0
#endif
#if (!SUPPORT_SCAN_BUF || !CONFIG_WPS_AP) && CONFIG_P2P_NEW
#error "If CONFIG_P2P_NEW, need to SUPPORT_SCAN_BUF"
#endif
/* For AP_MODE */
#ifndef CONFIG_AP_MODE
#define CONFIG_AP_MODE 1
#endif
#if (CONFIG_AP_MODE == 1) && (CONFIG_THROUGHPUT_LEVEL == 1)
#undef CONFIG_THROUGHPUT_LEVEL
#define CONFIG_THROUGHPUT_LEVEL 3 //ap mode default use 3
#endif
extern unsigned char g_user_ap_sta_num;
extern unsigned int g_ap_sta_num;
#define USER_AP_STA_NUM g_user_ap_sta_num
#if !defined(AP_STA_NUM)
#define AP_STA_NUM 3 // g_ap_sta_num
#endif
#if CONFIG_AP_MODE
extern unsigned char g_user_ap_expire_to;
#ifndef CONFIG_EXPIRE_TO
#define CONFIG_EXPIRE_TO g_user_ap_expire_to
#endif
#ifndef CONFIG_NATIVEAP_MLME
#define CONFIG_NATIVEAP_MLME 1
#endif
#ifndef CONFIG_INTERRUPT_BASED_TXBCN
#define CONFIG_INTERRUPT_BASED_TXBCN 0
#endif
#if CONFIG_INTERRUPT_BASED_TXBCN
#ifndef CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT
#define CONFIG_INTERRUPT_BASED_TXBCN_EARLY_INT 0
#endif
#ifndef CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#define CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR 1
#endif
#endif
#ifndef CONFIG_GK_REKEY
#define CONFIG_GK_REKEY 0
#endif
#else
#if CONFIG_NATIVEAP_MLME
#error "CONFIG_AP_MODE has not been defined, define CONFIG_AP_MODE firstly"
#endif
#endif
#if !CONFIG_INTERRUPT_BASED_TXBCN && CONFIG_INTERRUPT_BASED_TXBCN_BCN_OK_ERR
#error "CONFIG_INTERRUPT_BASED_TXBCN has not been defined, define CONFIG_INTERRUPT_BASED_TXBCN firstly"
#endif
#ifndef USE_DEDICATED_BCN_TX
#define USE_DEDICATED_BCN_TX (CONFIG_AP_MODE ? 1 : 0)
#endif
#if CONFIG_AP_MODE && CONFIG_GK_REKEY && !CONFIG_MULTIPLE_WPA_STA
#error "If CONFIG_GK_REKEY when CONFIG_AP_MODE, need to CONFIG_MULTIPLE_WPA_STA"
#endif
#if !CONFIG_AP_MODE && CONFIG_CONCURRENT_MODE
#error "If CONFIG_CONCURRENT_MODEE, need to CONFIG_AP_MODE"
#endif
/* For MP_MODE */
#ifndef CONFIG_MP_INCLUDED
#define CONFIG_MP_INCLUDED 0
#endif
#ifndef HAL_EFUSE_MEMORY
#define HAL_EFUSE_MEMORY 0
#endif
#if CONFIG_MP_INCLUDED
#ifndef CONFIG_MP_IWPRIV_SUPPORT
#define CONFIG_MP_IWPRIV_SUPPORT 1
#endif
#ifdef HAL_EFUSE_MEMORY
#undef HAL_EFUSE_MEMORY
#endif
#if defined(CONFIG_RTL8723D) || defined(CONFIG_RTL8821C) || defined(CONFIG_RTL8703B) || defined(CONFIG_RTL8723F) || defined(CONFIG_RTL8188F)
#define HAL_EFUSE_MEMORY 1
#else
#define HAL_EFUSE_MEMORY 0
#endif
#ifndef CONFIG_MP_NORMAL_IWPRIV_SUPPORT
#define CONFIG_MP_NORMAL_IWPRIV_SUPPORT 0
#endif
#else
#if CONFIG_MP_IWPRIV_SUPPORT || HAL_EFUSE_MEMORY || CONFIG_MP_NORMAL_IWPRIV_SUPPORT
#error "CONFIG_MP_INCLUDED has not been defined, define CONFIG_MP_INCLUDED firstly"
#endif
#endif
#ifndef MP_DRIVER
#define MP_DRIVER (CONFIG_MP_INCLUDED ? 1 : 0)
#endif
#ifndef CONFIG_MAC_ADDRESS
#define CONFIG_MAC_ADDRESS 0
#endif
#ifndef CONFIG_WOWLAN
#define CONFIG_WOWLAN 0
#endif
#if CONFIG_WOWLAN
#ifndef CONFIG_WOWLAN_HW_CAM
#define CONFIG_WOWLAN_HW_CAM 1
#endif
#ifndef CONFIG_SUSPEND
#define CONFIG_SUSPEND 1
#endif
#ifndef CONFIG_RTW_SDIO_KEEP_IRQ
#define CONFIG_RTW_SDIO_KEEP_IRQ 0
#endif
#ifndef CONFIG_GPIO_WAKEUP
#define CONFIG_GPIO_WAKEUP 1
#endif
#ifndef CONFIG_WOWLAN_AWAKE_PATTERN
#define CONFIG_WOWLAN_AWAKE_PATTERN 1//1:icmp awake 2:tcp udp unicast awake 3:tcp unicast awake
#endif
#ifndef CONFIG_WOWLAN_AWAKE_FAST_ENTER_PS
#define CONFIG_WOWLAN_AWAKE_FAST_ENTER_PS 0
#endif
#ifndef CONFIG_DECREASE_POWER_CONSUMPTION_IN_WOWLAN
#define CONFIG_DECREASE_POWER_CONSUMPTION_IN_WOWLAN 0
#endif
#ifndef CONFIG_WOWLAN_AWAKE_PATTERN_TCP_PORT
#define CONFIG_WOWLAN_AWAKE_PATTERN_TCP_PORT 0
#endif
#else
#if CONFIG_SUSPEND || CONFIG_RTW_SDIO_KEEP_IRQ || CONFIG_GPIO_WAKEUP || CONFIG_WOWLAN_AWAKE_PATTERN
#error "CONFIG_WOWLAN has not been defined, define CONFIG_WOWLAN firstly"
#endif
#endif
#ifndef CONFIG_DFS
#define CONFIG_DFS 1
#endif
// adaptivity
#define RTW_ADAPTIVITY_EN_DISABLE 0
#define RTW_ADAPTIVITY_EN_ENABLE 1
#ifndef CONFIG_RTW_ADAPTIVITY_EN
#define CONFIG_RTW_ADAPTIVITY_EN RTW_ADAPTIVITY_EN_DISABLE
#endif
#define RTW_ADAPTIVITY_MODE_NORMAL 0
#define RTW_ADAPTIVITY_MODE_CARRIER_SENSE 1
#ifndef CONFIG_RTW_ADAPTIVITY_MODE
#define CONFIG_RTW_ADAPTIVITY_MODE RTW_ADAPTIVITY_MODE_NORMAL
#endif
#ifndef CONFIG_RTW_ADAPTIVITY_DML
#define CONFIG_RTW_ADAPTIVITY_DML 0
#endif
#ifndef POWER_BY_RATE_SUPPORT
#define POWER_BY_RATE_SUPPORT 0
#endif
#ifndef ENABLE_POWER_BY_RATE
#define ENABLE_POWER_BY_RATE 2
#endif
#ifndef CONFIG_TXPWR_LIMIT
#define CONFIG_TXPWR_LIMIT 0
#endif
#ifndef CONFIG_EMPTY_EFUSE_PG_ENABLE
#define CONFIG_EMPTY_EFUSE_PG_ENABLE 0
#endif
#ifndef CONFIG_RETRY_LIMIT
#define CONFIG_RETRY_LIMIT 48
#endif
/*
* Interface Related Config ***************************************************
*/
#if defined(USE_SDIO_INTERFACE)
#define CONFIG_SDIO_HCI
#elif defined(USE_USB_INTERFACE)
#define CONFIG_USB_HCI
#else
#define CONFIG_GSPI_HCI
#endif
#ifndef CONFIG_USB_TX_NUM_ENABLE
#ifdef CONFIG_USB_HCI
#define CONFIG_USB_TX_NUM_ENABLE 0
#endif
#endif
#ifndef CONFIG_USB_TX_AGGREGATION
#if CONFIG_USB_TX_NUM_ENABLE
#define CONFIG_USB_TX_AGGREGATION 1
#endif
#endif
#ifndef CONFIG_USB_RX_AGGREGATION
#ifdef CONFIG_USB_HCI
#define CONFIG_USB_RX_AGGREGATION 0
#endif
#endif
#if defined(CONFIG_USB_HCI) && (!CONFIG_USB_RX_AGGREGATION) && (CONFIG_RX_BUS_AGG_NUM > 1)
#define CONFIG_USB_RX_AGGREGATION 1
#endif
#if defined(CONFIG_USB_HCI) && (!CONFIG_USB_TX_AGGREGATION) && (CONFIG_TX_BUS_AGG_NUM > 1)
#error "no need to increase CONFIG_TX_BUS_AGG_NUM, CONFIG_USB_TX_AGGREGATION is not enabled"
#endif
#ifndef CONFIG_XMIT_THREAD_MODE
#ifdef CONFIG_SDIO_HCI
#define CONFIG_XMIT_THREAD_MODE 1
#else
#define CONFIG_XMIT_THREAD_MODE 0
#endif
#endif
#ifndef CONFIG_RECV_THREAD_MODE
#ifdef CONFIG_USB_HCI
#define CONFIG_RECV_THREAD_MODE 1 /* Wlan IRQ Polling Mode*/
#else
#define CONFIG_RECV_THREAD_MODE 0 /* Wlan IRQ Polling Mode*/
#endif
#endif
#ifndef CONFIG_ISR_THREAD_MODE_POLLING
#define CONFIG_ISR_THREAD_MODE_POLLING 0 /* Wlan IRQ Polling Mode*/
#endif
#ifndef CONFIG_ISR_THREAD_MODE_INTERRUPT /* Wlan IRQ Interrupt Mode*/
#if !defined(CONFIG_USB_HCI) && !defined(CONFIG_SDIO_HCI)
#define CONFIG_ISR_THREAD_MODE_INTERRUPT 1
#else
#define CONFIG_ISR_THREAD_MODE_INTERRUPT 0
#endif
#endif
#if CONFIG_ISR_THREAD_MODE_POLLING && CONFIG_ISR_THREAD_MODE_INTERRUPT
#error "CONFIG_ISR_THREAD_MODE_POLLING and CONFIG_ISR_THREAD_MODE_INTERRUPT are mutually exclusive. "
#endif
#ifndef CONFIG_RECV_TASK_THREAD_MODE
#define CONFIG_RECV_TASK_THREAD_MODE 0
#endif
#ifndef USE_SKB_AS_XMITBUF
#ifdef CONFIG_USB_HCI
#if CONFIG_USB_TX_NUM_ENABLE
#define USE_SKB_AS_XMITBUF 0
#else
#define USE_SKB_AS_XMITBUF 1
#endif
#else
#define USE_SKB_AS_XMITBUF 1
#endif
#endif
#ifndef CONFIG_SDIO_FW_READ_TEST
#define CONFIG_SDIO_FW_READ_TEST 0
#endif
/*
* BT Related Config **********************************************************
*/
#ifndef CONFIG_BT_EN
#define CONFIG_BT_EN 0
#endif
#if CONFIG_BT_EN
#define CONFIG_FTL_ENABLED 1
#endif
#ifndef CONFIG_BT_COEXIST
#define CONFIG_BT_COEXIST 0
#endif
#if CONFIG_BT_COEXIST
#undef NOT_SUPPORT_BT
#define NOT_SUPPORT_BT 0
#ifndef CONFIG_BT_MAILBOX
#define CONFIG_BT_MAILBOX 1
#endif
#ifndef CONFIG_BT_EFUSE
#define CONFIG_BT_EFUSE 1
#endif
#ifndef CONFIG_BT_TWO_ANTENNA
#define CONFIG_BT_TWO_ANTENNA 0
#endif
#ifndef CONFIG_DYNAMIC_SET_A2DP_CASE_WIFI_SLOT_PROPORTION
#define CONFIG_DYNAMIC_SET_A2DP_CASE_WIFI_SLOT_PROPORTION 0
#endif
#if defined(CONFIG_RTL8723F)||defined(CONFIG_RTL8821C)
#define RTW_HALMAC_BT_COEX 1
#endif
#else
#if CONFIG_BT_MAILBOX || CONFIG_BT_EFUSE || CONFIG_BT_TWO_ANTENNA
#error "CONFIG_BT_COEXIST has not been defined, define CONFIG_BT_COEXIST firstly"
#endif
#endif
/*
* Others *********************************************************************
*/
#ifndef CONFIG_WIFI_CRITICAL_CODE_SECTION
#define CONFIG_WIFI_CRITICAL_CODE_SECTION
#endif
#ifndef CONFIG_MEMORY_ACCESS_ALIGNED
#define CONFIG_MEMORY_ACCESS_ALIGNED 1
#endif
#ifndef BAD_MIC_COUNTERMEASURE
#define BAD_MIC_COUNTERMEASURE 1
#endif
#ifndef DEFRAGMENTATION
#define DEFRAGMENTATION 1
#endif
#ifndef WIFI_LOGO_CERTIFICATION
#define WIFI_LOGO_CERTIFICATION 0
#endif
#ifndef RX_AGGREGATION
#define RX_AGGREGATION (WIFI_LOGO_CERTIFICATION ? 1 : 0)
#endif
#ifndef RX_AMSDU
#define RX_AMSDU (WIFI_LOGO_CERTIFICATION ? 1 : 0)
#endif
#ifndef USE_MUTEX_FOR_SPINLOCK
#define USE_MUTEX_FOR_SPINLOCK 1
#endif
#ifndef CONFIG_WIFI_SPEC
#define CONFIG_WIFI_SPEC 0
#endif
#ifndef ENABLE_HWPDN_PIN
#define ENABLE_HWPDN_PIN 1
#endif
#ifndef BE_I_CUT
#define BE_I_CUT 1
#endif
#ifndef CONFIG_PASSIVESCAN_HIDDENSSID_ENABLE
#define CONFIG_PASSIVESCAN_HIDDENSSID_ENABLE 0
#endif
#ifndef CONFIG_NEW_SIGNAL_STAT_PROCESS
#define CONFIG_NEW_SIGNAL_STAT_PROCESS 1
#endif
#ifndef CONFIG_SKIP_SIGNAL_SCALE_MAPPING
#define CONFIG_SKIP_SIGNAL_SCALE_MAPPING 1
#endif
#ifndef CONFIG_ADDRESS_ALIGNMENT
#define CONFIG_ADDRESS_ALIGNMENT 0
#endif
#if CONFIG_ADDRESS_ALIGNMENT && !defined(ALIGNMENT_SIZE)
#define ALIGNMENT_SIZE 4
#endif
#ifndef WLAN_WRAPPER_VERSION
#define WLAN_WRAPPER_VERSION 1
#endif
#ifndef TIME_THRES
#define TIME_THRES 20
#endif
#ifndef CONFIG_TIMER_THREAD
#define CONFIG_TIMER_THREAD 0
#endif
#if CONFIG_TIMER_THREAD
#ifndef CONFIG_TIMER_CALLBACK_FROM_ISR
#define CONFIG_TIMER_CALLBACK_FROM_ISR 0
#endif
#endif
/*
* CUSTOMER REQUEST START *******************************************************
*/
/* For priority adjust*/
#ifndef CONFIG_SET_PRIORITY
#define CONFIG_SET_PRIORITY 0
#endif
// for ali
#ifndef CONFIG_CONNECT_FAST_FEATURE
#define CONFIG_CONNECT_FAST_FEATURE 0
#endif
#ifndef CONFIG_NO_REFERENCE_FOR_COMPILER
#define CONFIG_NO_REFERENCE_FOR_COMPILER 0
#endif
#ifndef CONFIG_AVIOD_STACKFLOW_FOR_64PLATFORM
#define CONFIG_AVIOD_STACKFLOW_FOR_64PLATFORM 0
#endif
#ifndef CONFIG_QUICKEN_INIT
#define CONFIG_QUICKEN_INIT 0
#endif
#ifndef CONFIG_OPEN_LPS_ONLYFOR_BTCO
#define CONFIG_OPEN_LPS_ONLYFOR_BTCO 0
#endif
#ifndef CONFIG_CUSTOMIZE_PHYREG_OF_PWR_BY_RTAE_AND_LIMIT
#define CONFIG_CUSTOMIZE_PHYREG_OF_PWR_BY_RTAE_AND_LIMIT 0
#endif
//for ali end
#ifndef NO_CALLER
#define NO_CALLER 0
#endif
#ifndef SHRINK_DATA_SIZE
#define SHRINK_DATA_SIZE 0
#endif
#if SHRINK_DATA_SIZE
#undef NO_CALLER
#define NO_CALLER 1
#endif
/*
* Debug Related Config *******************************************************
*/
#ifndef CONFIG_DEBUG
#define CONFIG_DEBUG 1
#endif
#ifndef CONFIG_DEBUG_RTL871X
#define CONFIG_DEBUG_RTL871X 0
#endif
#ifndef CONFIG_MEM_MONITOR
#define CONFIG_MEM_MONITOR MEM_MONITOR_SIMPLE
#endif
#ifndef CONFIG_TRACE_SKB
#define CONFIG_TRACE_SKB 0
#endif
#ifndef WLAN_INTF_DBG
#define WLAN_INTF_DBG 0
#endif
// for Debug message
#ifndef DBG
#define DBG 0
#endif
#ifndef CONFIG_IWPRIV_DBG
#define CONFIG_IWPRIV_DBG 1
#endif
#endif //WLANCONFIG_H